Pelco FRV40D2M1ST | 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication | Multimode Fiber. Buy Now. Fast Shipping.
The FRV40D2M1ST receiver transmit four channels of unidirectional video, two channels of bidirectional data, and one bidirectional contact closure over one optical fiber in a two-slot wide design. The FRV40D2M1ST receiver are available in multimode version. The FRV40D2M1ST plug-and-play design ensures ease of installation and no electrical or optical adjustments are required. Modular in design, FRV40D2M1ST unit can be rack-mounted using the EURACK/USRACK chassis, or stand-alone modules can be placed on a desktop or mounted to a wall (wall mount kit not required). For stand-alone and wall mount installations, external power is required for the FRV40D2M1ST unit. The unit can be powered with the recommended FEXTPS fiber external power supply.
Features
- 10-Bit Digitally Encoded Video for High-Quality Transmission over a Single Fiber
- 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
- 1 Bidirectional Contact Closure
- Multimode Fiber Support for Distances up to 2 km (1.2 mi)
- Exceeds All Requirements for the RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible with NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
Pelco FRV40D2M1ST | 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication | Multimode Fiber. Buy Now. Fast Shipping.
The FRV40D2M1ST receiver transmit four channels of unidirectional video, two channels of bidirectional data, and one bidirectional contact closure over one optical fiber in a two-slot wide design. The FRV40D2M1ST receiver are available in multimode version. The FRV40D2M1ST plug-and-play design ensures ease of installation and no electrical or optical adjustments are required. Modular in design, FRV40D2M1ST unit can be rack-mounted using the EURACK/USRACK chassis, or stand-alone modules can be placed on a desktop or mounted to a wall (wall mount kit not required). For stand-alone and wall mount installations, external power is required for the FRV40D2M1ST unit. The unit can be powered with the recommended FEXTPS fiber external power supply.
Features
- 10-Bit Digitally Encoded Video for High-Quality Transmission over a Single Fiber
- 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
- 1 Bidirectional Contact Closure
- Multimode Fiber Support for Distances up to 2 km (1.2 mi)
- Exceeds All Requirements for the RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible with NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
There are no reviews for this product.
No questions about this product.
