Pelco FTV40D2M1ST 4 Channel ST Video Fiber Transmitter Bidirectional, Multi-Mode

Pelco FTV40D2M1ST | 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication | Multimode Fiber Support. Buy Now.

The FTV40D2M1ST is a fiber transmitter transmit four channels of unidirectional video, two channels of bidirectional data, and one bidirectional contact closure over one optical fiber in a two-slot wide design. The FTV40D2M1ST transmitter is available in multimode version. The FTV40D2M1ST plug-and-play design ensures ease of installation and no electrical or optical adjustments are required. Modular in design, FTV40D2M1ST unit can be rack-mounted using the EURACK/USRACK chassis, or stand-alone modules can be placed on a desktop or mounted to a wall (wall mount kit not required).

For stand-alone and wall mount installations, external power is required for the FTV40D2M1ST unit. The unit can be powered with the recommended FEXTPS fiber external power supply.

Features

• 10-Bit Digitally Encoded Video for High-Quality Transmission over a Single Fiber
• 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
• 1 Bidirectional Contact Closure
• Multimode Fiber Support for Distances up to 2 km (1.2 mi)
• Exceeds All Requirements for the RS-250C Short-Haul Transmission Specification
• Laser Diode for Transmission of Optical Signals
• Compatible with NTSC, PAL, and SECAM Video Standards
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
• Voltage Transient Protection on All Power and Signal Input/Output Lines
• LED Status Indicators for Monitoring All Critical Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design

Downloads

Pelco FTV40D2M1ST | 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication | Multimode Fiber Support. Buy Now.

The FTV40D2M1ST is a fiber transmitter transmit four channels of unidirectional video, two channels of bidirectional data, and one bidirectional contact closure over one optical fiber in a two-slot wide design. The FTV40D2M1ST transmitter is available in multimode version. The FTV40D2M1ST plug-and-play design ensures ease of installation and no electrical or optical adjustments are required. Modular in design, FTV40D2M1ST unit can be rack-mounted using the EURACK/USRACK chassis, or stand-alone modules can be placed on a desktop or mounted to a wall (wall mount kit not required).

For stand-alone and wall mount installations, external power is required for the FTV40D2M1ST unit. The unit can be powered with the recommended FEXTPS fiber external power supply.

Features

• 10-Bit Digitally Encoded Video for High-Quality Transmission over a Single Fiber
• 2 Bidirectional Data Channels Support RS-232, RS-422 and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
• 1 Bidirectional Contact Closure
• Multimode Fiber Support for Distances up to 2 km (1.2 mi)
• Exceeds All Requirements for the RS-250C Short-Haul Transmission Specification
• Laser Diode for Transmission of Optical Signals
• Compatible with NTSC, PAL, and SECAM Video Standards
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
• Voltage Transient Protection on All Power and Signal Input/Output Lines
• LED Status Indicators for Monitoring All Critical Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design

Downloads