The CNFE4+1SMSS2 is a five-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100Mbs and is designed to combine Ethernet data from the four electrical ports into a single optical port and forward that data to the next network device, using two-fiber ST or SC optical connectors. There is no programming required to use this switch. The ComNet CNFE4+1SMS comes pre-programmed, preventing network video flooding with a switch selection that allows the fiber port to be used as an uplink or as an unmanaged switch. It is “Plug-and-Play” easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE4+1SMS may be either wall mounted, rack mounted (“ComFit” packaging) or DIN –rail mounted with the use of the ComNet DINBKT1 adapter.
- No Programming Required
- Optical port supports 100 Mbps full duplex data
- Pre-programmed Port for uplink to other Ethernet devices
- Status indicating LEDs provide rapid indication of critical operating parameters
- IEEE 802.3 compliant
- Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- ComFit standard form factor is interchangeable between stand-alone or rack mount use
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
- Standard ComFit models are hot-swappable
Downloads
The CNFE4+1SMSS2 is a five-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100Mbs and is designed to combine Ethernet data from the four electrical ports into a single optical port and forward that data to the next network device, using two-fiber ST or SC optical connectors. There is no programming required to use this switch. The ComNet CNFE4+1SMS comes pre-programmed, preventing network video flooding with a switch selection that allows the fiber port to be used as an uplink or as an unmanaged switch. It is “Plug-and-Play” easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE4+1SMS may be either wall mounted, rack mounted (“ComFit” packaging) or DIN –rail mounted with the use of the ComNet DINBKT1 adapter.
- No Programming Required
- Optical port supports 100 Mbps full duplex data
- Pre-programmed Port for uplink to other Ethernet devices
- Status indicating LEDs provide rapid indication of critical operating parameters
- IEEE 802.3 compliant
- Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- ComFit standard form factor is interchangeable between stand-alone or rack mount use
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
- Standard ComFit models are hot-swappable
Downloads
There are no reviews for this product.
No questions about this product.
