Comnet CNFE4FX4US 4-Port 100 Mbps Ethernet Unmanaged Switch; 4 FX.
The ComNet(tm) CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features & Benefits
- 100 BASE-FX optical ports
- Optical port supports 100 Mbps full duplex data
- Uses interchangeable SFP for fiber type, distance and connector
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED Indicators for Power and Activity
- IEEE 802.3 compliant
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use -- ComFit
- LIMITED LIFETIME WARRANTY
Similar Switches
- CNFE4FX2TX2US 4 Port 10/100 Mbps Ethernet Unmanaged Switch; 2 FX, 2 TX
- CNFE4TX4US 4 Port 10/100 Mbps Ethernet Unmanaged Switch; 4 TX
Card Cages
- ComNet C1US Rack Mount Card Cage with Power Supply
- ComNet C2US Rack Mount Card Cage with Redundant Power
*Note: SFP Modules Sold Separately
Downloads
Comnet CNFE4FX4US 4-Port 100 Mbps Ethernet Unmanaged Switch; 4 FX.
The ComNet(tm) CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features & Benefits
- 100 BASE-FX optical ports
- Optical port supports 100 Mbps full duplex data
- Uses interchangeable SFP for fiber type, distance and connector
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED Indicators for Power and Activity
- IEEE 802.3 compliant
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use -- ComFit
- LIMITED LIFETIME WARRANTY
Similar Switches
- CNFE4FX2TX2US 4 Port 10/100 Mbps Ethernet Unmanaged Switch; 2 FX, 2 TX
- CNFE4TX4US 4 Port 10/100 Mbps Ethernet Unmanaged Switch; 4 TX
Card Cages
- ComNet C1US Rack Mount Card Cage with Power Supply
- ComNet C2US Rack Mount Card Cage with Redundant Power
*Note: SFP Modules Sold Separately
Downloads
There are no reviews for this product.
No questions about this product.
