Macurco OX-12-W 120V Oxygen (O2) Fixed Gas Detector

The Macurco OX-12 is a dual relay Oxygen (O2) detector, controller and transducer. The has select-able 4-20 mA output, buzzer digital display options. It an electronic detection system used to measure the concentration of provide feedback automatic exhaust fan control help maintain appropriate concentrations in commercial applications. low level meter capable detecting from 0-25% by volume Oxygen.

Select-able Options

• Fan actuation: at 18, 18.1..., 20.2 (default), 20.3, 20.4 & 20.5% v/v high 23.5% (preset)
• Output: relay, Alarm 4-20mA current loop
• Controls: (0-25% v/v), buzzer, delay, minimum run-time

Installation

• Mounts on standard 4" x electrical box
• 5 SPDT controls valves, louvers or fans
• 0.5 N.O. N.C connects warning devices panels
• 4-20mA loop - compatible with DVP-120 Panel
• Factory calibrated

Other Features

• Supervised design: detector problem will cause activate
• Optional calibration test kit allows OX-6 be field calibrated tested
• ETL Listed UL 61010-1, CAN/CSA C22.2 No 61010-1
• White housing

Location

A normally mounted room wall column one foot above floor central area where air movement generally good. Use same spacing as for smoke detectors, 30-foot centers, 900 square feet per (84 sq. meters). coverage depends within facility. Extra detectors may needed near any areas people work stagnant. mounts 4x4 box supplied by contractor. Do not install inside another unless good air flow through it. mount normal ambient temperature below 0F exceeds 125F (below -18C 52C).