GRI 2650 Fluid Sensor with Relay Contact Open Loop

The 2650 is used to detect the presence of fluid and to provide a relay output for signal or control of an external device. The switch operates on 24 Volts AC and functions as a Normally Open or Normally Closed Sensor. The red and black wires power the switch while the brown, white and green wires are the relay output wires. After installation these units should be tested with a damp sponge or paper towel and inspected annually. If there is any corrosion or damage the sensors should be replaced.

Features

• Will detect any conductive non-flammable liquid
• Ideal anywhere liquid detection is required
• Automatic reset
• 6 foot jacketed lead standard
• Custom lead length available
• 24 Volt AC sensor

Downloads

The 2650 is used to detect the presence of fluid and to provide a relay output for signal or control of an external device. The switch operates on 24 Volts AC and functions as a Normally Open or Normally Closed Sensor. The red and black wires power the switch while the brown, white and green wires are the relay output wires. After installation these units should be tested with a damp sponge or paper towel and inspected annually. If there is any corrosion or damage the sensors should be replaced.

Features

• Will detect any conductive non-flammable liquid
• Ideal anywhere liquid detection is required
• Automatic reset
• 6 foot jacketed lead standard
• Custom lead length available
• 24 Volt AC sensor

Downloads