Optex AX-200TFR | Indoor, Outdoor | Significant cost saving alternative to traditional hardwired systems | Low battery output and LED | D.Q. circuit. Buy Now.
The Optex AX-200TFR is an outdoor battery operated and wireless-ready photoelectric detector featuring a 200' detection zone.
The battery powered AX-200TFR is a revolution in the perimeter security industry, offering a significant cost saving alternative to a traditional hardwired system. No trenching or wiring is required, drastically reducing labor time and installation costs. The unit comes wireless ready with a multi-functional back box and is compatible with most manufacturers wireless systems. The AX-200TFR comes with four 3.6V batteries (two for each side), with a minimum lifespan of 3 years.
Long Battery Life:
Model AX-200TFR has an average battery lifespan (Tx: 3 yrs./ Rx: 5 yrs.). Uses four LSH20 (3.6 V, 13 Ah) batteries manufactured by SAFT.
Multifunction Back Box:
The spacious multi-function back box has room for wireless transmitters, lead wires, output terminals, batteries, and is tamper-resistant.
Easy Battery Replacement:
It allows you to easily replace the batteries without opening the front cover. Not necessary to do the optical alignment.
Triple Tamper Functions:
Form C output activates when either cover or back box as well as chassis is removed.
Low Battery Output LED:
The unit automatically outputs when the battery power becomes low. *To monitor the low battery signal, another wireless transmitter is required. Low battery LED will flicker when a front cover is removed.
Intermittent Output Function:
Alarm signals are sent periodically to avoid missed alarm while the beam is broken. Its function is effective for wireless systems which do not recognize "Restore" status.
Battery Saving Timer:
Alarm output activation are limited by a timer to 2 minutes. Even if there are continuous alarm events, the alarm output operates only once in the timer period. It prolongs the battery life of a wireless transmitter
Basic Performance:
99% beam blocking stability; 4 selectable beam frequencies; D.Q. circuit (environmental disqualification); N.C./N.O. output selection switch; A.G.C. circuit; International Protection (IP55); Beam interruption adjustment function; High-grade aspherical lens; Easy angle adjustment function.
Downloads
Optex AX-200TFR | Indoor, Outdoor | Significant cost saving alternative to traditional hardwired systems | Low battery output and LED | D.Q. circuit. Buy Now.
The Optex AX-200TFR is an outdoor battery operated and wireless-ready photoelectric detector featuring a 200' detection zone.
The battery powered AX-200TFR is a revolution in the perimeter security industry, offering a significant cost saving alternative to a traditional hardwired system. No trenching or wiring is required, drastically reducing labor time and installation costs. The unit comes wireless ready with a multi-functional back box and is compatible with most manufacturers wireless systems. The AX-200TFR comes with four 3.6V batteries (two for each side), with a minimum lifespan of 3 years.
Long Battery Life:
Model AX-200TFR has an average battery lifespan (Tx: 3 yrs./ Rx: 5 yrs.). Uses four LSH20 (3.6 V, 13 Ah) batteries manufactured by SAFT.
Multifunction Back Box:
The spacious multi-function back box has room for wireless transmitters, lead wires, output terminals, batteries, and is tamper-resistant.
Easy Battery Replacement:
It allows you to easily replace the batteries without opening the front cover. Not necessary to do the optical alignment.
Triple Tamper Functions:
Form C output activates when either cover or back box as well as chassis is removed.
Low Battery Output LED:
The unit automatically outputs when the battery power becomes low. *To monitor the low battery signal, another wireless transmitter is required. Low battery LED will flicker when a front cover is removed.
Intermittent Output Function:
Alarm signals are sent periodically to avoid missed alarm while the beam is broken. Its function is effective for wireless systems which do not recognize "Restore" status.
Battery Saving Timer:
Alarm output activation are limited by a timer to 2 minutes. Even if there are continuous alarm events, the alarm output operates only once in the timer period. It prolongs the battery life of a wireless transmitter
Basic Performance:
99% beam blocking stability; 4 selectable beam frequencies; D.Q. circuit (environmental disqualification); N.C./N.O. output selection switch; A.G.C. circuit; International Protection (IP55); Beam interruption adjustment function; High-grade aspherical lens; Easy angle adjustment function.
Downloads
There are no reviews for this product.
No questions about this product.
