The AFI-4 is a fully arrayable loudspeaker versatile enough for clubs, discos, churches, theaters, and theme parks. Much of this versatility comes from the available options that include a 60° x 45° or 90° x 45° horn as well as bi-amplification capabilities. These horns, as well as the logo plate, are rotatable to allow alternative hanging positions.
Features
Driver Complement
- Low Frequency: One Apogee 12" (305mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise
- High Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
Input Connectors
Dual gas-tight barrier strip, screw type #8
Compatible Processors
Compatible with AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
Handles
Two handles - one at the top, one at the bottom, designed as an integral part of the enclosure (no moving parts)
Grille
Highly durable, quality finish on perforated steel
Rigging Hardware
Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
Finish
Textured high-strength white epoxy paint
Enclosure Type
30° trapezoidal, optimally vented bass
Cabinet Construction
Multi-ply hardwood
Downloads
AFI-4W-WR-Specsheet
The AFI-4 is a fully arrayable loudspeaker versatile enough for clubs, discos, churches, theaters, and theme parks. Much of this versatility comes from the available options that include a 60° x 45° or 90° x 45° horn as well as bi-amplification capabilities. These horns, as well as the logo plate, are rotatable to allow alternative hanging positions.
Features
Driver Complement
- Low Frequency: One Apogee 12" (305mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise
- High Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
Input Connectors
Dual gas-tight barrier strip, screw type #8
Compatible Processors
Compatible with AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
Handles
Two handles - one at the top, one at the bottom, designed as an integral part of the enclosure (no moving parts)
Grille
Highly durable, quality finish on perforated steel
Rigging Hardware
Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
Finish
Textured high-strength white epoxy paint
Enclosure Type
30° trapezoidal, optimally vented bass
Cabinet Construction
Multi-ply hardwood
Downloads
AFI-4W-WR-Specsheet
There are no reviews for this product.
No questions about this product.
