16 AWG 4 Pair Type MC-HL Continuous Aluminum Armor Cable, Individual + Overall Shield, PVC Jacket, 600V
Cut to length - sold by the foot. Enter the desired footage in the QTY box.
Minimum 50' to maximum 2500'. Please call for longer put ups.
Applications:
For use in harsh environments where maximum conductor and electrostatic interference protection is required. Impervious armor prevents the entrance of water, gas and corrosive elements into the electrical core. Used for instrumentation and process and control applications in a broad range of commercial and industrial applications. Approved for continuous use at 90°C in wet or dry locations. May be installed indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts.
Conductor:
Bare, annealed copper per ASTM B-3, class B stranded per ASTM B-8
Insulation:
Polyvinyl Chloride (PVC/nylon)
Jacket:
Black sunlight-resistant PVC
Inner Jacket:
Polyvinyl Chloride (PVC) with rip cord
Individual Shield:
Aluminum/polyester tape with tinned copper drain wire
Overall Shield:
Aluminum/polyester tape with tinned copper drain wire
Armor:
Impervious corrugated aluminum armor
Color Code:
Black and white for pairs and black, white and red for triads with printed number
Stanadards:
Meets UL 1569 requirements for metal-clad cables (Type MC-HL), meets the requirements of the IEEE 383, IEEE 1202 and UL 1685 70,000 Btu flame tests
Specifications*:
Size: 16 AWG
Number of Pairs: 4
Number of Strands: 7
Insulation Thickness: 0.020 inches
Jacket Thickness: 0.060 inches
Overall Diameter: 0.90 inches
Net Weight: 0.365 lbs per ft
*Data provided on this page is subject to change based on different manufacturers variances.
There are no reviews for this product.
No questions about this product.
