4/0 MV-105, 25kV/35kV, EPR/PVC Power Cable w/ Copper Tape Shield, 133%/100% Insulation

MV-105 EPR/PVC Power Cable w/ Copper Tape Shield, 25kV = 133% Insulation, 35kV = 100% Insulation

Cut to length - sold by the foot. Enter the desired footage in the QTY box.
Minimum 50' to maximum 1000'. Please call for longer put ups.

Applications:
For use in power circuits up to 25/35 kV when installed in open air, conduit, duct, or direct buried, for wet and dry locations. Used for power applications in chemical plants, refineries, steel mills, industrial plants, utility substations and generating stations

Jacket:
Black Polyvinylchloride (PVC) Jacket, sunlight resistant

Standards:
Listed Type MV-105 per UL 1072 and meets the requirements of ICEA S-93-639. Sizes 1/0 and larger marked "for CT use" and pass UL 1685 70,000 Btu/hr flame test

Conductors:

Class B stranded, annealed, bare copper per ASTM B-3, (compact stranding per ASTM B-496 is available). Strand shield is an extruded semiconducting, thermosetting compound

Insulation:

Ethylene Propylene Rubber (EPR), physical and electrical properties are in accordance with ICEA S-93-639 (NEMA WC74)

Insulation Shield:
Extruded semi-conducting thermoset insulation shield. Metallic shield is a helically applied 5 mil uncoated copper tape

Ampacity:

Based on three single conductor cables in isolated conduit in air per 2008 NEC Table 310.73 with a conductor temperature of 90°C and an ambient temperature of 40°C

Temperature:
105°C

Voltage:
25/35kV

Specifications*:

Size: 4/0
Insulation Thickness: 0.345 inches
Conductor Diameter: 0.479 inches
Insulation Diameter: 1.210 inches
Insulation Shield Diameter: 1.270 inches
Jacket Diameter: 1.430 inches
Weight: 1.44 lbs per ft
Amps In Duct: 315 amps
Amps In Air: 445 amps

*Data provided on this page is subject to change based on different manufacturers variances.