4/0 Stranded Aluminum Conductor 15KV URD, 133%, Full Neutral
Cut to length - sold by the foot. Enter the desired footage in the QTY box.
Applications:
Aluminum Conductor 15KV URD cable is primary used for underground distribution, in direct burial or installed in conduit. 15KV URD cable is suitable for use in wet or dry locations. URD cable is to be used at 15,000 volts or less and not to exceed 90°C temperature in normal use.
Conductor:
Solid or compressed concentric stranded 1350 series aluminum conductor per ASTM. The stranded conductors are water-blocked with conductor filling compound.
Conductor Shield:
Extruded thermoset semiconducting shield, which is free stripping from the conductor and bonded to the insulation
Insulation:
Naturally high dielectric strength TR-XLPE insulation. Covered by extruded thermoset semiconducting insulation shield. Optional EPR insulation is available upon request.
Metalic Shield:
Concentric neutral consisting of solid bare copper wires helically applied and uniformly spaced over the insulation shield.
Jacket:
Black jacket of linear lows density polyethylene (LLDPE), which is sunlight, abrasion and heat resistant. The jacket has 3 red stripes, the NESC lightning bolt and sequential footage markings.
Standards:
ASTM B230, B231, B609 • ANSI/ICEA S-94-649 • AEIC CS-8 • RUS ACCEPTED • For 90°C continuous, 130°C emergency and 250°C shortcircuit operation.
Specifications*:
Size: 4/0
Insulation Thickness: 220 mils
Concentric Neutral: 13-# 10
Conductor Diameter: 0.515 inches
Insulation Diameter: 1.00 inches
Insulation Shield Diameter: 1.07 inches
Jacket Diameter: 1.31 inches
Cable Weight: 1.122 lbs per ft
Ampacity: 90°C in Duct = 241 amps - 90°C Direct Burial = 320 amps
*Data provided on this page is subject to change based on different manufacturers variances.
There are no reviews for this product.
No questions about this product.
