The 4513-16-IB from Adams Rite is a Standard Duty Deadlatch Lock, 7/8" Backset, Less Strike, RH or LHR, Zinc Plated. The 4510 Series has includes a reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S Deadlock of same backset and faceplate shape.
Features
- Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging
- Cylinder Backset: 7/8", 31/32", 1-1/8" or 1-1/2" only
- Case: Measures 1" x 5-13/16" x depth, Depth varies by backset, Steel with corrosion-resistant plating
- Latchbolt: 1/2" x 1" x 1/2" throw, All metal with hardened steel internal pins, Handing is reversible without special tools
- Auxiliary Bolt: All metal, Deadlocks latch bolt to prevent "loiding" or case-knife entry
- Strikes: Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush, Available separately: radius strike for opposite stile in paired doors; longer strike (4901) to cover slot strike of MS lock; long lip strikes for centerhung doors
- Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, Cylinders with MS® cams can be readily obtained from most cylinder manufacturers
The 4513-16-IB from Adams Rite is a Standard Duty Deadlatch Lock, 7/8" Backset, Less Strike, RH or LHR, Zinc Plated. The 4510 Series has includes a reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S Deadlock of same backset and faceplate shape.
Features
- Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging
- Cylinder Backset: 7/8", 31/32", 1-1/8" or 1-1/2" only
- Case: Measures 1" x 5-13/16" x depth, Depth varies by backset, Steel with corrosion-resistant plating
- Latchbolt: 1/2" x 1" x 1/2" throw, All metal with hardened steel internal pins, Handing is reversible without special tools
- Auxiliary Bolt: All metal, Deadlocks latch bolt to prevent "loiding" or case-knife entry
- Strikes: Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush, Available separately: radius strike for opposite stile in paired doors; longer strike (4901) to cover slot strike of MS lock; long lip strikes for centerhung doors
- Cylinder Cam: Operable by any standard mortise cylinder with MS® cam, Cylinders with MS® cams can be readily obtained from most cylinder manufacturers
There are no reviews for this product.
No questions about this product.
