The 7170-519-628-00 from Adams Rite is an electric strike 24VDC monitor / fail-secure in clear anodized, 1-1/16" or less. The 7170 series Electric Strike with 4-7/8" faceplates are specifically designed for mortise or cylindrical type locksets with up to 3/4" latchbolt projection without deadbolt. It provides remote electrical control of any door equipped with a mortise or cylindrical type lock that has up to 3/4" latchbolt projection without deadbolt. Once activated the electrical actuation unlocks the strike jaw releasing the latchbolt so that the door can be opened without operating the latch itself. The Adams Rite 7170 series super compact mechanism fits smoothly into hollow metal jamb sections as shallow as 1-7/8". It easily fits existing prep for discontinued Adams Rite 7560AN, 7570, 7860AN, 7870 series electric strikes. The electric strike must be positioned to accommodate offset mortise latches during installation.
Features
- Clear Anodized Finish
- Aluminum construction
- Grade 1 strength
- 24V DC Continuous or Intermittent voltage operation
- Current Draw/Amps for 24V operation: DC Continuous - 0.17A (silent)
- Stainless Steel Split-Jaw is included with 5/8 x 1-7/16 x 5/8" deep strike opening
- Available in Zinc-aluminum alloy case of size approximately 1" x 3-3/8" x 1-7/8" deep
- Provides electrical remote control, allowing door to open without depressing the panic hardware cross bar
- UL 1034 burglary-resistant listed hardware
- For use in hollow metal or wood door jambs
- Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
- Fail Secure as standard
- Flat faceplate 1-1/4" x 4-7/8" with square corners is included as always
- Fail Secure feature - require power to be applied to unlock the strike lip which is locked on loss of power
Downloads
7170-519-628-00-Specsheet
7170-519-628-00-Brochure
The 7170-519-628-00 from Adams Rite is an electric strike 24VDC monitor / fail-secure in clear anodized, 1-1/16" or less. The 7170 series Electric Strike with 4-7/8" faceplates are specifically designed for mortise or cylindrical type locksets with up to 3/4" latchbolt projection without deadbolt. It provides remote electrical control of any door equipped with a mortise or cylindrical type lock that has up to 3/4" latchbolt projection without deadbolt. Once activated the electrical actuation unlocks the strike jaw releasing the latchbolt so that the door can be opened without operating the latch itself. The Adams Rite 7170 series super compact mechanism fits smoothly into hollow metal jamb sections as shallow as 1-7/8". It easily fits existing prep for discontinued Adams Rite 7560AN, 7570, 7860AN, 7870 series electric strikes. The electric strike must be positioned to accommodate offset mortise latches during installation.
Features
- Clear Anodized Finish
- Aluminum construction
- Grade 1 strength
- 24V DC Continuous or Intermittent voltage operation
- Current Draw/Amps for 24V operation: DC Continuous - 0.17A (silent)
- Stainless Steel Split-Jaw is included with 5/8 x 1-7/16 x 5/8" deep strike opening
- Available in Zinc-aluminum alloy case of size approximately 1" x 3-3/8" x 1-7/8" deep
- Provides electrical remote control, allowing door to open without depressing the panic hardware cross bar
- UL 1034 burglary-resistant listed hardware
- For use in hollow metal or wood door jambs
- Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
- Fail Secure as standard
- Flat faceplate 1-1/4" x 4-7/8" with square corners is included as always
- Fail Secure feature - require power to be applied to unlock the strike lip which is locked on loss of power
Downloads
7170-519-628-00-Specsheet
7170-519-628-00-Brochure
There are no reviews for this product.
No questions about this product.
