The 74R1M130 from Adams Rite is a UltraLine electric strike for rim type exit devices monitored in clear anodized. The 74R1 Series Electric Strike is specifically designed for rim exit devices with 3/4" Pullman type latchbolt. It provides remote electrical control and thus allowing door to open without actuation of the exit device. This is a semi-mortised strike for rim exit devices having 3/4" Pullman type bolts without auxiliary bolts. The electric strike opens electrically under 35 lbs. of preload.
Features
- Clear Anodized Finish
- Aluminum construction
- Opens under 35lbs of pre-load
- Grade 1 strength
- The Adams Rite 74R1 can operate in either fail Secure or fail Safe modes easily and can run on 12 or 24 volts in DC or AC mode
- Stainless Steel Split-Jaw is included with 5/8" x 1-7/16" x 9/16" deep strike opening
- Available in Zinc-aluminum alloy case of size approximately 1" x 3-3/8" x 1-1/16" deep
- Perfect solution for storefront doors with Adams Rite hardware
- UL 1034 burglary-resistant listed hardware
- For use in hollow metal, wood and aluminum door jambs
- Non handed features of this electric strike features an ultra-compact design
- Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
Downloads
74R1M130-Specsheet
74R1M130-Installation-Instructions
The 74R1M130 from Adams Rite is a UltraLine electric strike for rim type exit devices monitored in clear anodized. The 74R1 Series Electric Strike is specifically designed for rim exit devices with 3/4" Pullman type latchbolt. It provides remote electrical control and thus allowing door to open without actuation of the exit device. This is a semi-mortised strike for rim exit devices having 3/4" Pullman type bolts without auxiliary bolts. The electric strike opens electrically under 35 lbs. of preload.
Features
- Clear Anodized Finish
- Aluminum construction
- Opens under 35lbs of pre-load
- Grade 1 strength
- The Adams Rite 74R1 can operate in either fail Secure or fail Safe modes easily and can run on 12 or 24 volts in DC or AC mode
- Stainless Steel Split-Jaw is included with 5/8" x 1-7/16" x 9/16" deep strike opening
- Available in Zinc-aluminum alloy case of size approximately 1" x 3-3/8" x 1-1/16" deep
- Perfect solution for storefront doors with Adams Rite hardware
- UL 1034 burglary-resistant listed hardware
- For use in hollow metal, wood and aluminum door jambs
- Non handed features of this electric strike features an ultra-compact design
- Two monitoring signal switches which sense whether latchbolt is in strike and whether strike jaw is blocked
Downloads
74R1M130-Specsheet
74R1M130-Installation-Instructions
There are no reviews for this product.
No questions about this product.