Alphalinq 100 Controller Unit Use with Alphalinq 100 Series Required. SS106 Transformer (24Vac) (1) Required Per Master Unit. The Alpha Communications® AC152 annunciator control unit is used to provide power and control circuits to operate the AlphaLinq™ 100 series visual nurse-call system, but can be used and is backwards compatible with some older systems as well. The AC152 contains the electronic circuitry necessary to detect the presence of routine and emergency calls, and to generate audible and visual control signals. It provides steady or intermittent voltages to operate visual signaling devices. The AC152 supports up to 1 amp of current load from the field devices, and supports interconnection of a secondary power supply to increase the output current load to 3 amps. Protective circuitry has been incorporated to protect routine and emergency call commons from shorts.
- U.L. Listed 1069 - to the latest standards
- Yellow LED for primary power in; Green LED for secondary power out indication
- Easily Installs Right on Finished Wall Surface or in Optional Junction Box (model# CEC152)
- Provides steady light and slow tone for routine call; flashing light and rapid tone for emergency call
- Positive Screw Terminal Connectors
- Built-in Battery Charging circuit
- Built-in Form 'C' Dry Contact Relay to activate external devices
- Routine and emergency commons incorporate short-protection circuitry
Downloads
Alphalinq 100 Controller Unit Use with Alphalinq 100 Series Required. SS106 Transformer (24Vac) (1) Required Per Master Unit. The Alpha Communications® AC152 annunciator control unit is used to provide power and control circuits to operate the AlphaLinq™ 100 series visual nurse-call system, but can be used and is backwards compatible with some older systems as well. The AC152 contains the electronic circuitry necessary to detect the presence of routine and emergency calls, and to generate audible and visual control signals. It provides steady or intermittent voltages to operate visual signaling devices. The AC152 supports up to 1 amp of current load from the field devices, and supports interconnection of a secondary power supply to increase the output current load to 3 amps. Protective circuitry has been incorporated to protect routine and emergency call commons from shorts.
- U.L. Listed 1069 - to the latest standards
- Yellow LED for primary power in; Green LED for secondary power out indication
- Easily Installs Right on Finished Wall Surface or in Optional Junction Box (model# CEC152)
- Provides steady light and slow tone for routine call; flashing light and rapid tone for emergency call
- Positive Screw Terminal Connectors
- Built-in Battery Charging circuit
- Built-in Form 'C' Dry Contact Relay to activate external devices
- Routine and emergency commons incorporate short-protection circuitry
Downloads
There are no reviews for this product.
No questions about this product.
