Alpha FS1000S 2-Wire Surface APT Station - Stainless Steel

2-Wire Surface APT Station - Stainless Steel No Internal Communications Qwikbus Series (2-Wire) (Maximum 3 Units in APT.). The Alpha Communications® / S.T.R.™ FS1000S QwikBUS™ station is designed to work as an apartment type open-voice intercom station, using a minimal of wiring. FS1000S station in a building can be wired on only two (2) common (loop) wires! The QwikBUS™ system can support hundreds of FS1000S stations on a single system. Choose from White and five (5) other decorator inspired finishes.

This attractive and trim station easily surface mount right on the finished wall, or can flush mount over a model UMF1000 flush plastic housing with model HWB mounting screws. Stations can be changed to desk mount with the addition of a model TZ-FS (White) desk adapter. FS1000S QwikBUS™ station selectable electronic tone signaling, Voice On, Door Release, Call Volume, and three (3) momentary button switches (marked '0', '1' and '2'). These switches can be used for door release, or other signaling functions, depending upon system configuration. FS1000S QwikBUS™ stations can be inter-mixed with the HT3033 series QwikBUS™ handsets (but not with the QwikBUS™ videointercom stations, which require the FSV1000 series units).

• Crystal-Clear Half-Duplex Voice Operation
• Easy Installation - Only 2 Common (loop) Wires Required
• Eavesdrop Privacy
• Clear Voice Fidelity using Electret Condenser Microphones
• Rugged and Reliable / Simple to Operate
• Mounts Surface, or optionally Flush or Desk mount (with optional extra cost adapters)
• Available in White and five (5) other decorator finishes

Downloads

2-Wire Surface APT Station - Stainless Steel No Internal Communications Qwikbus Series (2-Wire) (Maximum 3 Units in APT.). The Alpha Communications® / S.T.R.™ FS1000S QwikBUS™ station is designed to work as an apartment type open-voice intercom station, using a minimal of wiring. FS1000S station in a building can be wired on only two (2) common (loop) wires! The QwikBUS™ system can support hundreds of FS1000S stations on a single system. Choose from White and five (5) other decorator inspired finishes.

This attractive and trim station easily surface mount right on the finished wall, or can flush mount over a model UMF1000 flush plastic housing with model HWB mounting screws. Stations can be changed to desk mount with the addition of a model TZ-FS (White) desk adapter. FS1000S QwikBUS™ station selectable electronic tone signaling, Voice On, Door Release, Call Volume, and three (3) momentary button switches (marked '0', '1' and '2'). These switches can be used for door release, or other signaling functions, depending upon system configuration. FS1000S QwikBUS™ stations can be inter-mixed with the HT3033 series QwikBUS™ handsets (but not with the QwikBUS™ videointercom stations, which require the FSV1000 series units).

• Crystal-Clear Half-Duplex Voice Operation
• Easy Installation - Only 2 Common (loop) Wires Required
• Eavesdrop Privacy
• Clear Voice Fidelity using Electret Condenser Microphones
• Rugged and Reliable / Simple to Operate
• Mounts Surface, or optionally Flush or Desk mount (with optional extra cost adapters)
• Available in White and five (5) other decorator finishes

Downloads