Alpha SS910 Sub Station-Flush-Stainless Steel

Sub Station-Flush-Stainless Steel May Required AN912 Control Module Requires BBF910 Flush or BBS910 Housing. The SS910 is a tamper-resistant remote station designed to protect the speaker, microphone, LED, and circuitry from external abuse and the elements. This remote station is ideally suited for use in elevator, correctional facilities, institutions, parking facilities and secured entrances. The SS910 is designed to work with the RM5000EX and/or CB901EX microprocessor intercom systems.

The face plate is constructed of high quality 11 gauge Stainless Steel with a brushed finish. The weather-resistant 45 ohm speaker is physically protected by an offset baffle and the microphone is encased in a machined block to prevent tampering. For a wider viewing angle and considerable security, the LED is mounted behind .250" thick LUCITE. Remote(s) flush mounts in a 3.5" deep three gang electrical box (our model BBF910) with four tamper resistant screws (not included), or can be mounted using a model BBS910 back box. When used as a elevator remote station and with the AND16 series annunciator, each SS910 requires a model AN912 annunciator control module.

• Clear two-way communications
• Tamper-Resistant Stainless Steel
• L.E.D. Indicator (no Call Button)
• Easy installation
• Simple home-run wiring

Downloads

Sub Station-Flush-Stainless Steel May Required AN912 Control Module Requires BBF910 Flush or BBS910 Housing. The SS910 is a tamper-resistant remote station designed to protect the speaker, microphone, LED, and circuitry from external abuse and the elements. This remote station is ideally suited for use in elevator, correctional facilities, institutions, parking facilities and secured entrances. The SS910 is designed to work with the RM5000EX and/or CB901EX microprocessor intercom systems.

The face plate is constructed of high quality 11 gauge Stainless Steel with a brushed finish. The weather-resistant 45 ohm speaker is physically protected by an offset baffle and the microphone is encased in a machined block to prevent tampering. For a wider viewing angle and considerable security, the LED is mounted behind .250" thick LUCITE. Remote(s) flush mounts in a 3.5" deep three gang electrical box (our model BBF910) with four tamper resistant screws (not included), or can be mounted using a model BBS910 back box. When used as a elevator remote station and with the AND16 series annunciator, each SS910 requires a model AN912 annunciator control module.

• Clear two-way communications
• Tamper-Resistant Stainless Steel
• L.E.D. Indicator (no Call Button)
• Easy installation
• Simple home-run wiring

Downloads