Single Wireless Call Station-Plastic use with Alphaecall 200 Series or Alphaentry (V5.5 or Later) Systems-Requires IH527 Box.The Wireless Single Visual Patient Station(s) shall be Alpha Communications® model WPS501, or approved equal and shall include a lighted 'CALL-PLACED' indicator, a 'CANCEL' button, and a jack for the required model WPS501 (single) call-cords or model SF302 (double) call-cords (or other specialty type cords as required). A call will be registered at the associated master station(s), and optional wired corridor light(s). The station's 'CALL PLACED' LED will light if the call switch is pushed or if the call-cord is removed from its jack. All electronic components needed for these features and functions shall be mounted on a printed circuit board and all station components shall be mounted on a rugged ABS (White) plastic faceplate. The station shall be mounted into a model IH527 surface back box with its associated WSM501 wireless support module and RY024AM relay module.Contractor shall observe all local and national electrical and building codes.
- Simple Push-button Calling (using required call cord)
- Lighted CALL-PLACED LED Indicator
- Call-reset CANCEL Push-button
- Call Automatically Registers if Call Cord is accidentally removed
- Flame Retardant type ABS White Plastic Faceplate
Downloads
Single Wireless Call Station-Plastic use with Alphaecall 200 Series or Alphaentry (V5.5 or Later) Systems-Requires IH527 Box.The Wireless Single Visual Patient Station(s) shall be Alpha Communications® model WPS501, or approved equal and shall include a lighted 'CALL-PLACED' indicator, a 'CANCEL' button, and a jack for the required model WPS501 (single) call-cords or model SF302 (double) call-cords (or other specialty type cords as required). A call will be registered at the associated master station(s), and optional wired corridor light(s). The station's 'CALL PLACED' LED will light if the call switch is pushed or if the call-cord is removed from its jack. All electronic components needed for these features and functions shall be mounted on a printed circuit board and all station components shall be mounted on a rugged ABS (White) plastic faceplate. The station shall be mounted into a model IH527 surface back box with its associated WSM501 wireless support module and RY024AM relay module.Contractor shall observe all local and national electrical and building codes.
- Simple Push-button Calling (using required call cord)
- Lighted CALL-PLACED LED Indicator
- Call-reset CANCEL Push-button
- Call Automatically Registers if Call Cord is accidentally removed
- Flame Retardant type ABS White Plastic Faceplate
Downloads
There are no reviews for this product.
No questions about this product.
