eBridge1STR is a versatile solution Ethernet adapter/media converter kit which transmits data at 25Mbps and power over Coax cable in a PoE+ compliant format. The eBridge1PCRM is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge1ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They provide a simple way to replace legacy analog products with new IP devices over existing coax.
Applications
- Retrofit digital IP cameras in an analog CCTV installation.
- Works with IP Megapixel and non Megapixel cameras.
- Extend Network link distance in an industrial environment over 610m.
- Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
Input eBridge100RM
- Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
Ethernet
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5.
- Distance: up to 500m.
- Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) Delivered to camera by eBridge1ST. Power provided by eBridge1PCRM to eBridge1ST by PoE protocol.
- Throughput is rated to pass 25Mbps of data at distances up to 500m.
Coax Link
- Distance: Coax 500m for power delivery.
- Connectivity: BNC, RG-59/U or similar.
LED Indicators
- eBridge1PCRM and eBridge1ST: Yellow - PoE ON (by respective RJ45 jack).
- eBridge1PCRM and eBridge1ST: Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
Environmental
- Operating Temperature eBridge1PCRM: -20 C to +49 C (-4 F to 120.2 F).
- Operating Temperature eBridge1ST: For 15W -40 F to 167 F (-40 C to 75 C). For 25W -40 F to 140 F (-40 C to 60 C).
- Storage Temperature: -40 F to 167 F (-40 C to 75 C).
- Humidity: 20 to 85%, non-condensing.
Functions
- Auto detection and protection of legacy non-PoE cameras/devices.
Downloads
eBridge1STR is a versatile solution Ethernet adapter/media converter kit which transmits data at 25Mbps and power over Coax cable in a PoE+ compliant format. The eBridge1PCRM is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge1ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They provide a simple way to replace legacy analog products with new IP devices over existing coax.
Applications
- Retrofit digital IP cameras in an analog CCTV installation.
- Works with IP Megapixel and non Megapixel cameras.
- Extend Network link distance in an industrial environment over 610m.
- Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
Input eBridge100RM
- Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
Ethernet
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5.
- Distance: up to 500m.
- Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) Delivered to camera by eBridge1ST. Power provided by eBridge1PCRM to eBridge1ST by PoE protocol.
- Throughput is rated to pass 25Mbps of data at distances up to 500m.
Coax Link
- Distance: Coax 500m for power delivery.
- Connectivity: BNC, RG-59/U or similar.
LED Indicators
- eBridge1PCRM and eBridge1ST: Yellow - PoE ON (by respective RJ45 jack).
- eBridge1PCRM and eBridge1ST: Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active.
Environmental
- Operating Temperature eBridge1PCRM: -20 C to +49 C (-4 F to 120.2 F).
- Operating Temperature eBridge1ST: For 15W -40 F to 167 F (-40 C to 75 C). For 25W -40 F to 140 F (-40 C to 60 C).
- Storage Temperature: -40 F to 167 F (-40 C to 75 C).
- Humidity: 20 to 85%, non-condensing.
Functions
- Auto detection and protection of legacy non-PoE cameras/devices.
Downloads
There are no reviews for this product.
No questions about this product.
