4-Port Ethernet over coax Receiver transmits IP video/data over coax up to 500m @ 25mbps. Compatible with eBridge1CT and devices incorporating sloc technology. UL/cUL Listed (UL60950-1). CE and C-Tick Approved.
The eBridge4CR is a CAT5 to Coax cable Ethernet receiver. The receiver enables fast 10/100Base-T Ethernet digital communication to be received over Coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission over the Coax can be extended up to 610m (more than five times the 100m Ethernet maximum length), eliminating the need for repeaters. At the same time the unit can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch. The eBridge4CR is to be used with a compatible Sony Hybrid cameras with 'sloc' technology. An eBridge1CT is required for other IP cameras/devices.
- Four (4) ports
- RJ45, auto-crossover
- 4-pair Cat-5 or better structured cable
- 24VDC to 56VDC UL Listed Class 2 power supply (polarity not observed) or UL Listed 24VAC Class 2 plug-in transformer
- Blue LED - Coax link connection
- Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active
- Green LED - Power
Applications:
-Retrofit digital IP cameras in an analog CCTV installation.
-Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
-Extend Network link distance in an industrial environment.
-Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.
-Enables simultaneous transmission of composite and digital IP video.
Downloads
4-Port Ethernet over coax Receiver transmits IP video/data over coax up to 500m @ 25mbps. Compatible with eBridge1CT and devices incorporating sloc technology. UL/cUL Listed (UL60950-1). CE and C-Tick Approved.
The eBridge4CR is a CAT5 to Coax cable Ethernet receiver. The receiver enables fast 10/100Base-T Ethernet digital communication to be received over Coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission over the Coax can be extended up to 610m (more than five times the 100m Ethernet maximum length), eliminating the need for repeaters. At the same time the unit can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch. The eBridge4CR is to be used with a compatible Sony Hybrid cameras with 'sloc' technology. An eBridge1CT is required for other IP cameras/devices.
- Four (4) ports
- RJ45, auto-crossover
- 4-pair Cat-5 or better structured cable
- 24VDC to 56VDC UL Listed Class 2 power supply (polarity not observed) or UL Listed 24VAC Class 2 plug-in transformer
- Blue LED - Coax link connection
- Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active
- Green LED - Power
Applications:
-Retrofit digital IP cameras in an analog CCTV installation.
-Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
-Extend Network link distance in an industrial environment.
-Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.
-Enables simultaneous transmission of composite and digital IP video.
Downloads
There are no reviews for this product.
No questions about this product.
