Altronix NETWAY4EWPX 4 Port PoE+ Hardened Switch

The Altronix NETWAY4EWPX outdoor PoE+ hardened switch provides a 1Gb SFP port and four (4) PoE+ (30W) ports or up to two (2) Hi-PoE (60W) ports. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

Features

Input

• 115VAC 60 Hz, 3A or 230VAC 50/60 Hz, 1.65A

Power Output

• 4-ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports
• IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant
• 120W total power
• Integral surge protection

Fiber Port

• One (1) Gigabit SFP port

Ethernet

• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair Cat-5 or better structured cable
• Distance: up to 100m
• Speed: 10/100/1000Mbps, half/full duplex, auto negotiation

Battery Backup

• Built-in charger for sealed lead acid or gel type batteries
• Automatic switch over to stand-by battery when AC fails

Indicators (LED)

• Individual PoE On LEDs for each port
• Individual IP Link status, 10/100Base-T/active LEDs for each port
• ALOS LED indicates fiber connection for SFP port
• Heartbeat LED indicates proper operation of the unit

LINQ Technology

• Remote network management allows for camera/device reset and monitoring
• Provides local and/or remote access to critical information via LAN/WAN
• Email and Windows Dashboard Alert notifications report real-time diagnostics
• Event log tracks history

Downloads

The Altronix NETWAY4EWPX outdoor PoE+ hardened switch provides a 1Gb SFP port and four (4) PoE+ (30W) ports or up to two (2) Hi-PoE (60W) ports. Cameras/edge devices may be located up to 100m from the unit. Embedded LINQ Technology allows you to monitor, control and report power and diagnostics from anywhere.

Features

Input

• 115VAC 60 Hz, 3A or 230VAC 50/60 Hz, 1.65A

Power Output

• 4-ports PoE+ (30W) or up to two (2) Hi-PoE (60W) ports
• IEEE 802.3at (30W) and IEEE 802.3af (15W) compliant
• 120W total power
• Integral surge protection

Fiber Port

• One (1) Gigabit SFP port

Ethernet

• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair Cat-5 or better structured cable
• Distance: up to 100m
• Speed: 10/100/1000Mbps, half/full duplex, auto negotiation

Battery Backup

• Built-in charger for sealed lead acid or gel type batteries
• Automatic switch over to stand-by battery when AC fails

Indicators (LED)

• Individual PoE On LEDs for each port
• Individual IP Link status, 10/100Base-T/active LEDs for each port
• ALOS LED indicates fiber connection for SFP port
• Heartbeat LED indicates proper operation of the unit

LINQ Technology

• Remote network management allows for camera/device reset and monitoring
• Provides local and/or remote access to critical information via LAN/WAN
• Email and Windows Dashboard Alert notifications report real-time diagnostics
• Event log tracks history

Downloads