Altronix NETWAYSP4BTWP 4-port Hardened 802.3bt 4PPoE Switch and Power Supply NEMA4/4X, IP66 rated Outdoor enclosure

Altronix NetWaySP4BTWP Outdoor Hardened 4PPoE (802.3bt) Switch provides up to 180W distributed over four (4) PoE ports for high powered IP devices such as cameras and illuminators. This unit is equipped with two (2) 1Gb SFP (Fiber) fiber connectivity head end or additional switch. Cameras/edge may be located 100m from the unit. Embedded LINQ Technology allows you monitor, control, report power diagnostics anywhere.

Features

• Voltage: 115VAC, 60Hz, 2.5A 230VAC, 50/60Hz, 1.3A.
• Fusing: 5A/250V
• Maximum Power: rated at 90W each, total power
• IEEE 802.3af (15W), IEEE 802.3at (30W), IEE 802.3bt (90W) compliant.
• Integral surge protection
• Two Gigabit ports
• Four 10/100/1000 Mbps ports
• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair CAT5 better structured cable
• Distance: 100m
• Speed: Mbps, half/full duplex, auto negotiation
• Type: LiFePO4, sealed lead acid gel type batteries
• Failover: Upon AC loss, instantaneous
• Individual On LEDs each port
• Individual Link status, Base-T/active port
• ALOS LED indicates connection port
• Heartbeat proper operation of unit
• Multiple management VLAN assignment
• 802.1Q Tagged VLAN. 10 groups. ID Range 2-4095
• Remote network camera/device reset diagnostic monitoring
• Provides local and/or remote access critical information via LAN/WAN
• Email Windows Dashboard Alert notifications real-time diagnostics
• Event log tracks history
• Operating (180W): - 30° C 65° ( 22° F 149° F)
• Operating (150W): 75° 167° F)
• Storage: 85° 185° F)
• Relative Humidity: 85% +/- 5%
• BTU/Hr (approx.): 61 BTU/Hr
• - 304.8 2,000m.