Long Range Ethernet over UTP/CAT5e Receiver. Provides IP video/data over single twisted pair (UTP) up to 150m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) compliant. Requires Pace1PTM. UL/cUL Listed (UL60950-1). CE and C-Tick Approved.
The Pace1PRM is a long range Ethernet receiver. It is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.
- UL/CUL Listed for Information
- Technology Equipment (UL 60950-1)
- CE approved
- C-Tick compliant
- Powered by midspan or endspan
- PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5e or a single twisted pair UTP
- Speed: 10/100BaseT, half/full duplex, auto negotiation
- PoE compliant to IEEE 802.3af (15W) and PoE+
- compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol
- Throughput is rated to pass 100mbps of data
Applications:
Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
Extend Network link distance in an industrial environment over 610m.
Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.
Downloads
Long Range Ethernet over UTP/CAT5e Receiver. Provides IP video/data over single twisted pair (UTP) up to 150m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) compliant. Requires Pace1PTM. UL/cUL Listed (UL60950-1). CE and C-Tick Approved.
The Pace1PRM is a long range Ethernet receiver. It is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.
- UL/CUL Listed for Information
- Technology Equipment (UL 60950-1)
- CE approved
- C-Tick compliant
- Powered by midspan or endspan
- PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5e or a single twisted pair UTP
- Speed: 10/100BaseT, half/full duplex, auto negotiation
- PoE compliant to IEEE 802.3af (15W) and PoE+
- compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol
- Throughput is rated to pass 100mbps of data
Applications:
Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
Extend Network link distance in an industrial environment over 610m.
Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.
Downloads
There are no reviews for this product.
No questions about this product.
