Altronix PACE1PRMT Long Range Ethernet over CAT5e Receiver Adapter Kit

Long Range Ethernet over UTP/CAT5e Receiver/Transceiver adapter kit.  Transmits IP video/data over single twisted pair (UTP) up to 150m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). UL/cUL Listed (UL60950-1). CE Approved. Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.

UL/CUL Listed for Information

Technology Equipment (UL 60950-1)

CE approved

C-Tick compliant

Input (Pace1PRM):

Powered by midspan or endspan

PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)

Connectivity: RJ45, auto-crossover

Wire type: 4-pair CAT5e or a single twisted pair UTP

Speed: 10/100BaseT, half/full duplex, auto negotiation

PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol

Throughput is rated to pass 100mbps of data

Applications:

Retrofit digital IP cameras in an analog CCTV CAT5e or UTP installations.

Extend Network link distance in an industrial environment.

Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.

Downloads

Long Range Ethernet over UTP/CAT5e Receiver/Transceiver adapter kit.  Transmits IP video/data over single twisted pair (UTP) up to 150m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). UL/cUL Listed (UL60950-1). CE Approved. Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.

UL/CUL Listed for Information

Technology Equipment (UL 60950-1)

CE approved

C-Tick compliant

Input (Pace1PRM):

Powered by midspan or endspan

PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)

Connectivity: RJ45, auto-crossover

Wire type: 4-pair CAT5e or a single twisted pair UTP

Speed: 10/100BaseT, half/full duplex, auto negotiation

PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol

Throughput is rated to pass 100mbps of data

Applications:

Retrofit digital IP cameras in an analog CCTV CAT5e or UTP installations.

Extend Network link distance in an industrial environment.

Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.

Downloads