Altronix Pace1ST IP and PoE+ Mini Transceiver

Pace1ST is a long range transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex power via Cat5e higher cable in PoE(+) compliant format. The Pace1ST will not deliver non devices, thus avoiding damage improperly connected non-PoE cameras/devices. receiver passes which turn this an enabled IP camera/device. These plug play units facilitate cost effective solutions devices that need be installed distances greater than 100m.

Applications

• Retrofit cameras analog CCTV installations
• Works Megapixel cameras.
• Extend Network link distance industrial environment 610m.

Input

• PoE (15W) IEEE 802.3af PoE+ (30W) 802.3at from Pace8PRM, Pace16PRM.

Ethernet

• Connectivity: RJ45, auto-crossover.
• Wire 4-pair single twisted pair UTP.
• Distance: up 500m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE delivered camera by Pace1ST.
• Throughput rated pass data.

CAT5e Higher:

• Distance: 500m @ 100mbps.

LED Indicators

• Green ON (by respective RJ45 jack).
• Yellow Green LED status, 10/100Base-T/active.

Environmental

• Operating Temperature: 15W -40 F 167 (-40 C 75 C). 30W 149F 65 C).
• Storage C).
• Humidity: 20 85%, non-condensing.
• Operating Altitude: 1000 6,561.679 ft. (- 304.8 2000m).

Functions

• Auto detection protection legacy cameras/devices.