Altronix T1RM3CK1 4-Door Altronix/Mercury Access and Power Integration Wired Rack Mount Kit

Altronix T1RM3CK1 is a 4-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T1RM3CK1 accommodates one (1) Intelligent Dual Reader Controller and one (1) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. Also compatible with these authentic Mercury partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt.

Features

eFlow6NB Power Supply/Charger

Input

• Voltage: 120VAC, 60Hz, 3.5A
• Fusing: 5A / 250V

Output

• Voltage: 24VDC
• Current: 6A continuous
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered and regulated

Battery Charging

• Type: Sealed lead acid or gel type
• Fuse Rating: 10A @ 32V
• Failover: Upon AC loss, instantaneous
• (Batteries are sold separately)

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators LED

• Input: 120VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PDS8 Power Distribution Module

Input

• Voltage: 24VDC from eFlow6NB and 12VDC from VR6
• Fusing: 10A / 32V

Outputs

• Voltage: 12 and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing
• Fuses Rating: 3A / 32V

Indicators (LED)

• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

VR6 Voltage Regulator

Input

• Voltage: 24VDC from eFlow6NB

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators (LED)

• Input: 24VDC is present
• Output: Powered

ACM4 Access Power Controller

Input

• Voltage: 24VDC from eFlow6NB
• Fusing: 10A / 32V

Output

• Voltage: 24VDC
• Four (4) independently controlled fused outputs:
• a) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Fuses Rating: 3A / 32V

Indicators (LED's)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: - 20° C to 70° C ( - 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 87 BTU/Hr

Downloads

Altronix T1RM3CK1 is a 4-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T1RM3CK1 accommodates one (1) Intelligent Dual Reader Controller and one (1) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications. Also compatible with these authentic Mercury partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt.

Features

eFlow6NB Power Supply/Charger

Input

• Voltage: 120VAC, 60Hz, 3.5A
• Fusing: 5A / 250V

Output

• Voltage: 24VDC
• Current: 6A continuous
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered and regulated

Battery Charging

• Type: Sealed lead acid or gel type
• Fuse Rating: 10A @ 32V
• Failover: Upon AC loss, instantaneous
• (Batteries are sold separately)

Supervision

• AC Failure: Form “C” contacts
• Battery: Form “C” contacts
• Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge

Indicators LED

• Input: 120VAC is present
• DC Output: Powered
• Battery: Discharged or not connected

PDS8 Power Distribution Module

Input

• Voltage: 24VDC from eFlow6NB and 12VDC from VR6
• Fusing: 10A / 32V

Outputs

• Voltage: 12 and/or 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing
• Fuses Rating: 3A / 32V

Indicators (LED)

• DC Output: Eight (8) individual output LEDs
• Green: 12VDC
• Red: 24VDC

VR6 Voltage Regulator

Input

• Voltage: 24VDC from eFlow6NB

Output

• Voltage: 12VDC
• Current: 6A continuous
• Other: Surge suppression

Indicators (LED)

• Input: 24VDC is present
• Output: Powered

ACM4 Access Power Controller

Input

• Voltage: 24VDC from eFlow6NB
• Fusing: 10A / 32V

Output

• Voltage: 24VDC
• Four (4) independently controlled fused outputs:
• a) Fail-Safe and/or Fail-Secure power outputs
• Form “C” Relays rated 28VAC or VDC @ 2.5A
• b) Auxiliary power outputs (unswitched)
• c) Any combination of the above
• Fuses Rating: 3A / 32V

Indicators (LED's)

• Red LEDs: Outputs are triggered (relays energized)
• Green LED: FACP disconnect is triggered

Environmental

Temperature

• Operating: 0° C to 49° C (32° F to 120° F)
• Storage: - 20° C to 70° C ( - 4° F to 158° F)

Relative Humidity

• Relative Humidity 85% +/- 5%

BTU/Hr (approx.):

• 87 BTU/Hr

Downloads