The AFI-8WB is a biamplified fully arrayable loudspeaker capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate full bandwidth sound. Available with a 60° x 40° or 90° x 40° high frequency horn pattern insuring that the AFI-8WB works flawlessly in any room configuration.
Features
- Low Frequency: One Apogee 15"(381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High Frequency: One Apogee 3" (76mm) voice coil, 2" (51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of shortterm impedance rise
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/-8WB Modules) or DLC24
- Recommended Crossover (AFI-8B only): Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles - one top, one bottom - designed as an integral part of the enclosure (no moving parts)
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
Downloads
106-0856-Specsheet
The AFI-8WB is a biamplified fully arrayable loudspeaker capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate full bandwidth sound. Available with a 60° x 40° or 90° x 40° high frequency horn pattern insuring that the AFI-8WB works flawlessly in any room configuration.
Features
- Low Frequency: One Apogee 15"(381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High Frequency: One Apogee 3" (76mm) voice coil, 2" (51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of shortterm impedance rise
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/-8WB Modules) or DLC24
- Recommended Crossover (AFI-8B only): Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles - one top, one bottom - designed as an integral part of the enclosure (no moving parts)
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
Downloads
106-0856-Specsheet
There are no reviews for this product.
No questions about this product.
