Bosch ARD-SELECT-BOKM Reader, OSDP, Keypad, BLE, Black

The new LECTUS select line is Mobile Access ready and consists of two different reader variants, one with keypad and one without. Both variants are available in black and white colors, and can be flush-mounted, or surface-mounted if the optional mounting frame is used. To detect unauthorized disassembly, the readers have a tamper contact.

Since they are equipped with a Bluetooth® Low Energy module, it is possible to use mobile credentials, in addition to physical cards, with the Mobile Access solution by Bosch. This option ensures a seamless access, by using a mobile phone for authentication.

The new LECTUS select readers support a range of credential technologies such as MIFARE DESFire EV1, MIFARE DESFire EV2, LEGIC advant, as well as mobile credentials.

The readers have an RS485 interface that uses the OSDP V2 protocol. When operating the reader in this mode, a maximum of eight readers can be connected to the respective controller, the AMC2-4R4CF. The readers address can be set through the four DIP switches. During operation, three LED indicators and a beeper provide clear feedback to the user. All readers are IP54 rated.

Features

• Supports Mobile Access
• Easy installation
• Sabotage monitoring
• Three status LED indicators
• Numbers and symbols backlighted

Downloads

The new LECTUS select line is Mobile Access ready and consists of two different reader variants, one with keypad and one without. Both variants are available in black and white colors, and can be flush-mounted, or surface-mounted if the optional mounting frame is used. To detect unauthorized disassembly, the readers have a tamper contact.

Since they are equipped with a Bluetooth® Low Energy module, it is possible to use mobile credentials, in addition to physical cards, with the Mobile Access solution by Bosch. This option ensures a seamless access, by using a mobile phone for authentication.

The new LECTUS select readers support a range of credential technologies such as MIFARE DESFire EV1, MIFARE DESFire EV2, LEGIC advant, as well as mobile credentials.

The readers have an RS485 interface that uses the OSDP V2 protocol. When operating the reader in this mode, a maximum of eight readers can be connected to the respective controller, the AMC2-4R4CF. The readers address can be set through the four DIP switches. During operation, three LED indicators and a beeper provide clear feedback to the user. All readers are IP54 rated.

Features

• Supports Mobile Access
• Easy installation
• Sabotage monitoring
• Three status LED indicators
• Numbers and symbols backlighted

Downloads