D7212GV3 With Transformer, D1260 Atm Style Keypad, DX4020 Network Interface, D8103 Enclosure, D101 Lock And Key. The D7212GV3 Control Panel delivers a powerful new solution for intrusion (commercial and residential) and residential fire alarm system applications. Monitor alarm points for intruder or fire alarms while operating user command centers and other outputs. The D7212GV3 Control Panel includes a communicator that sends event reports to selected public switched telephone network (PSTN), IP network, or general packet radio service (GPRS) destinations through four programmable route groups. Program all system functions locally or remotely (attended or unattended) through Remote Programming Software (RPS); program critical parameters on site through a keypad. The D7212GV3 Control Panel provides up to 40 individually identified points. Each point accommodates normally-open and normally-closed devices with end-of-line (EOL) resistor supervision. Each point is programmable for fire, fire supervisory, or intrusion applications.
Each D1260 Series Keypad model is an SDI bus compatible device that works with G Series Control Panels. Each keypad model has an illuminated keypad, a bright four-line by 20-character English language liquid crystal display (LCD), and a sounder that emits eight warning tones.
The Conettix DX4020 Ethernet Network Interface Module creates two-way communications over Ethernet networks for compatible control panels.
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.).
Short-body lock set with one key supplied. Uses the D102 (#1358) replacement key.
D7212GV3 Features
- Fully integrated intrusion and fire functions allow users to interface with one system instead of two
- Four programmable areas with perimeter and interior partitioning
- 40 points with flexible configuration options to meet application specific requirements
- Commercial Wireless allows up to 32 RF points
D1260 Features
- Integrated user Help windows to simplify operation
- Illuminated four-line display
DX4020 Features
- Built-in IP-based alarm transport, programming, and control
- 10BASE-T or 100BASE-T network connection
- Full-duplex and half-duplex support
- Three-hole mounting pattern
- Support for dynamic or static IP addresses
D101 Features
- Short-body lock set with one key supplied
Downloads
D7212GV3 With Transformer, D1260 Atm Style Keypad, DX4020 Network Interface, D8103 Enclosure, D101 Lock And Key. The D7212GV3 Control Panel delivers a powerful new solution for intrusion (commercial and residential) and residential fire alarm system applications. Monitor alarm points for intruder or fire alarms while operating user command centers and other outputs. The D7212GV3 Control Panel includes a communicator that sends event reports to selected public switched telephone network (PSTN), IP network, or general packet radio service (GPRS) destinations through four programmable route groups. Program all system functions locally or remotely (attended or unattended) through Remote Programming Software (RPS); program critical parameters on site through a keypad. The D7212GV3 Control Panel provides up to 40 individually identified points. Each point accommodates normally-open and normally-closed devices with end-of-line (EOL) resistor supervision. Each point is programmable for fire, fire supervisory, or intrusion applications.
Each D1260 Series Keypad model is an SDI bus compatible device that works with G Series Control Panels. Each keypad model has an illuminated keypad, a bright four-line by 20-character English language liquid crystal display (LCD), and a sounder that emits eight warning tones.
The Conettix DX4020 Ethernet Network Interface Module creates two-way communications over Ethernet networks for compatible control panels.
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.).
Short-body lock set with one key supplied. Uses the D102 (#1358) replacement key.
D7212GV3 Features
- Fully integrated intrusion and fire functions allow users to interface with one system instead of two
- Four programmable areas with perimeter and interior partitioning
- 40 points with flexible configuration options to meet application specific requirements
- Commercial Wireless allows up to 32 RF points
D1260 Features
- Integrated user Help windows to simplify operation
- Illuminated four-line display
DX4020 Features
- Built-in IP-based alarm transport, programming, and control
- 10BASE-T or 100BASE-T network connection
- Full-duplex and half-duplex support
- Three-hole mounting pattern
- Support for dynamic or static IP addresses
D101 Features
- Short-body lock set with one key supplied
Downloads
There are no reviews for this product.
No questions about this product.
