Cantek CT-NP112-ID 2 Megapixel In-Ceiling PTZ Dome Network Camera, 20x Lens

Condition: New Features: Auto Gain Control, Automatic White Balance, Back Light Compensation, Day/Night, Digital Noise Reduction, Zoom, Motion Detection Tracking, ONVIF, Privacy Masking, Vandal Resistant, Wide Dynamic Range Brand: Cantek NDAA Compliance: No Protocols: IPv4/ IPv6, TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnPSNMP, FTP, 802.1X, QoS, HTTPS Power Consumption: Max. 18W Operating Temperature: -10℃-50℃(14℉-122℉) Operating Humidity: 90% or less Minimum Scene Illumination: Color- 0.05 lux (F1.6, 1/30 sec, 50 IRE, AGC On), B/W- 0.01 0.02 1/1 0.002 On) Camera Signal: Network IP Lens Type: Motorized Zoom Digital Reduction: 3D DNR Automatic Balance: Auto/Manual/ATW/Indoor/Outdoor/Daylight lamp/Sodium lamp Infrared Distance: Non Infrared Resolution: 2 Megapixel (1080p) Voltage: PoE Compression Method: H.264, M-JPEG Connection Wired Image Pixels-Effective: 1920(H) ×1080(V) Image Device: 1/2.8' progressive scan CMOS Electronic Shutter: 1/1-1/10,000s Dimensions (W x H): Φ165×168mm(Φ6.50”×6.61”) (In-ceiling) Durability: Indoor, Resistant Mount In-Ceiling Motion Tracking: Yes Privacy Masking: Yes Wide Range: Yes ONVIF: Yes Auto Control: Yes Day/Night: Yes Digital Yes Automatic Yes Back Compensation: Zoom: Yes

The CT-NP112-ID from Cantek is a in-ceiling PTZ dome camera, 20x lens.

Features

• High performance CMOS, up to 1920x1080@30fps resolution
• ±0.1° Preset Accuracy
• ONVIF(Open Video Interface Forum), CGI(Common Gateway Interface), PSIA(Physical Security Interoperability Alliance), ensure greater between different platforms and compatibility
• 3D intelligent positioning function
• Power-off memory function: restore & Lens status after reboot
• Impact Protection: IEC60068-2-75 test, Eh, 5J; EN50102, IK08
• Support PoE(802.3af)(indoor model)
• Support Hik cloud P2P

Downloads

  CT-NP112-ID-Specsheet