The Comnet CNFE1002SAC1B-M Small Size 100Mbps Fast Ethernet to Optical Fiber Media Converter (B), ST Connector, AC/DC Power, 1550/1310nm Single Mode (SM), 1 fiber.
Description
The ComNet(tm) Ethernet media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. These media converters are environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, the standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port; 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 20 km (12 miles) single mode
- Transparent to data encoding/compatible with major data protocols
- ST optical connector
- 1 single mode optical fiber design
- AC/DC powered
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
Accessories
- Comnet DINBKT1 DIN-Rail Adaptor Plate
Related Media Converters
- Comnet CNFE1002SAC1A-M Ethernet to Fiber Converter (1310/1550nm)
Downloads
The Comnet CNFE1002SAC1B-M Small Size 100Mbps Fast Ethernet to Optical Fiber Media Converter (B), ST Connector, AC/DC Power, 1550/1310nm Single Mode (SM), 1 fiber.
Description
The ComNet(tm) Ethernet media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. These media converters are environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, the standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port; 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 20 km (12 miles) single mode
- Transparent to data encoding/compatible with major data protocols
- ST optical connector
- 1 single mode optical fiber design
- AC/DC powered
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
Accessories
- Comnet DINBKT1 DIN-Rail Adaptor Plate
Related Media Converters
- Comnet CNFE1002SAC1A-M Ethernet to Fiber Converter (1310/1550nm)
Downloads
There are no reviews for this product.
No questions about this product.
