The ComNet CNFE1003SAC2-M Small Size Fast Ethernet to Optical Fiber Media Converter, SC Connector, AC/DC Power, 1310nm Single Mode, 2 Fiber.
Description
The ComNet CNFE1003SAC2-M Ethernet media converter is designed to transmit and receive 10/100 Mbps data over single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 20 km (12 miles) single mode
- Transparent to data encoding/compatible with major data protocols
- SC optical connectors
- 2 fiber design
- AC/DC powered
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED status Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
Optional DIN Rail Mount
- Comnet DINBKT1 DIN-Rail Adaptor Plate
Related Media Converter
- ComNet CNFE1003MAC2-M Ethernet to Fiber Converter (Multi Mode)
Downloads
The ComNet CNFE1003SAC2-M Small Size Fast Ethernet to Optical Fiber Media Converter, SC Connector, AC/DC Power, 1310nm Single Mode, 2 Fiber.
Description
The ComNet CNFE1003SAC2-M Ethernet media converter is designed to transmit and receive 10/100 Mbps data over single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 20 km (12 miles) single mode
- Transparent to data encoding/compatible with major data protocols
- SC optical connectors
- 2 fiber design
- AC/DC powered
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED status Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
Optional DIN Rail Mount
- Comnet DINBKT1 DIN-Rail Adaptor Plate
Related Media Converter
- ComNet CNFE1003MAC2-M Ethernet to Fiber Converter (Multi Mode)
Downloads
There are no reviews for this product.
No questions about this product.
