The ComNet CNFE1004M1A Fast Ethernet over Optical Fiber Media Converter (A), SC Connector, 1310/1550nm Multi Mode (MM), 1 Fiber.
Description
The ComNet CNFE1004M1A Ethernet media converter is designed to transmit and receive 10/100 Mbps data over multi mode (MM) optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, the standard size unit may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 miles) multi mode (MM)
- Transparent to data encoding/compatible with major data protocols
- SC optical connector
- 1 fiber design
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED Indicators
- Interchangeable between stand-alone or rack mount use -- ComFit
- IEEE 802.3 compliant
- Lifetime Warranty
Optional Card Cages
- Comnet C1US Rack Mount Card Cage with Power Supply
- Comnet C2US Rack Mount Card Cage with Redundant Power
Downloads
The ComNet CNFE1004M1A Fast Ethernet over Optical Fiber Media Converter (A), SC Connector, 1310/1550nm Multi Mode (MM), 1 Fiber.
Description
The ComNet CNFE1004M1A Ethernet media converter is designed to transmit and receive 10/100 Mbps data over multi mode (MM) optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, the standard size unit may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 miles) multi mode (MM)
- Transparent to data encoding/compatible with major data protocols
- SC optical connector
- 1 fiber design
- Voltage transient protection on all power and signal input/output lines
- No in-field optical adjustments required
- LED Indicators
- Interchangeable between stand-alone or rack mount use -- ComFit
- IEEE 802.3 compliant
- Lifetime Warranty
Optional Card Cages
- Comnet C1US Rack Mount Card Cage with Power Supply
- Comnet C2US Rack Mount Card Cage with Redundant Power
Downloads
There are no reviews for this product.
No questions about this product.
