The Ethernet CNFE1005M2 media converter is one-channel Ethernet electrical to optical media converter. These auto-negotiating devices accept a 10/100 Mbps electrical input and convert this to a 100 Mbps optical output. The media converters use multimode optical fiber and two fiber ST optical connector. LED indicators confirm operational status. All models are environmentally hardened with no electrical or optical adjustments (Plug and Play). Packaged in the exclusive Comnet ComFit housing, the standard size units may be either wall or rack mounted. Models within the series are also available in a small size. The units are powered by an included DC power supply.
- 10/100 Mbps Ethernet
- Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 mi) Multimode, 20 km (12 mi) Single Mode
- Transparent to data encoding/compatible with major data protocols
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications
- ST optical connector
- 2 fiber design
- AC/DC powered
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
- Standard size is hot-swappable rack module
- Standard size is interchangeable between stand-alone or rack mount use – ComFit
- IEEE 802.3 compliant
Downloads
The Ethernet CNFE1005M2 media converter is one-channel Ethernet electrical to optical media converter. These auto-negotiating devices accept a 10/100 Mbps electrical input and convert this to a 100 Mbps optical output. The media converters use multimode optical fiber and two fiber ST optical connector. LED indicators confirm operational status. All models are environmentally hardened with no electrical or optical adjustments (Plug and Play). Packaged in the exclusive Comnet ComFit housing, the standard size units may be either wall or rack mounted. Models within the series are also available in a small size. The units are powered by an included DC power supply.
- 10/100 Mbps Ethernet
- Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 mi) Multimode, 20 km (12 mi) Single Mode
- Transparent to data encoding/compatible with major data protocols
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications
- ST optical connector
- 2 fiber design
- AC/DC powered
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
- Standard size is hot-swappable rack module
- Standard size is interchangeable between stand-alone or rack mount use – ComFit
- IEEE 802.3 compliant
Downloads
There are no reviews for this product.
No questions about this product.
