2TX TO 1 FX Small Size 100Mbps Media Converter (A), ST Connector, AC/DC Power, mm, 1 fiber, 48V POE, Power Supply Included. 60w output.
The ComNet Ethernet CNFE2002M1APoE/HO/M media converter is two-channel Ethernet electrical to optical media converters with PoE+. This auto-negotiating device accept two 10/100 Mbps electrical inputs and convert this to a single 100 Mbps optical output. This media converter is multimode and one fiber ST optical connector. The ComNet exclusive Demux feature allows for port isolation, replicating two media converter over one fiber. The ComNet exclusive Mux feature prevents network video flooding of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink path. The CNFE2002M1APoE/HO/M can be powered by wide range DC input and provide 60 watt power. The PoE models can be powered by a sold seperately 48 volt DC power supply.
- 60W PoE+ on ports 1
- 10/100 Mbps Ethernet
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Distances up to: 3 km (2 mi) Multimode
- ST optical connector
- 1 fiber design
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- No in-field optical adjustments required
- Full size units feature a contact closure output for remote side link failure detection
- Standard size is hot-swappable rack module
- Standard size is interchangeable between stand-alone or rack mount use – ComFit
Downloads
2TX TO 1 FX Small Size 100Mbps Media Converter (A), ST Connector, AC/DC Power, mm, 1 fiber, 48V POE, Power Supply Included. 60w output.
The ComNet Ethernet CNFE2002M1APoE/HO/M media converter is two-channel Ethernet electrical to optical media converters with PoE+. This auto-negotiating device accept two 10/100 Mbps electrical inputs and convert this to a single 100 Mbps optical output. This media converter is multimode and one fiber ST optical connector. The ComNet exclusive Demux feature allows for port isolation, replicating two media converter over one fiber. The ComNet exclusive Mux feature prevents network video flooding of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink path. The CNFE2002M1APoE/HO/M can be powered by wide range DC input and provide 60 watt power. The PoE models can be powered by a sold seperately 48 volt DC power supply.
- 60W PoE+ on ports 1
- 10/100 Mbps Ethernet
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Optical port supports 100 Mbps full duplex data
- Distances up to: 3 km (2 mi) Multimode
- ST optical connector
- 1 fiber design
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- No in-field optical adjustments required
- Full size units feature a contact closure output for remote side link failure detection
- Standard size is hot-swappable rack module
- Standard size is interchangeable between stand-alone or rack mount use – ComFit
Downloads
There are no reviews for this product.
No questions about this product.
