100Mbps Media Converter, Power Over Ethernet, 48V POE, Power Supply Included. The ComNet CNFE2MCPOE Ethernet media converter is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP modules. These models require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE2MCPOE transmits and receives a single channel of Ethernet data. It also supports IEEE 802.3at as Power Sourcing Equipment (PSE) with up to 30 Watts @ 48VDC (not supported when installed in ComNet Rack). The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally hardened to operate in extreme conditions.
- 10/100 Mbps Ethernet
- Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Power over Ethernet (PoE) 30W@48VDC (not supported on CNFE2MCPOE when mounted within ComNet rack)
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to 80 km with optional SFPs
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
- Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
Downloads
100Mbps Media Converter, Power Over Ethernet, 48V POE, Power Supply Included. The ComNet CNFE2MCPOE Ethernet media converter is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP modules. These models require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE2MCPOE transmits and receives a single channel of Ethernet data. It also supports IEEE 802.3at as Power Sourcing Equipment (PSE) with up to 30 Watts @ 48VDC (not supported when installed in ComNet Rack). The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally hardened to operate in extreme conditions.
- 10/100 Mbps Ethernet
- Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data
- Power over Ethernet (PoE) 30W@48VDC (not supported on CNFE2MCPOE when mounted within ComNet rack)
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X crossover
- Distances up to 80 km with optional SFPs
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
- Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
Downloads
There are no reviews for this product.
No questions about this product.
