1000Mbps Media Converter, Power Over Ethernet, 48V POE Power Supply Included.
The ComNet CNGE2MCPOEM Ethernet 2 port media converter is designed to transmit and receive 10/100/1000 Mbps data over optical fiber through user selectable SFP options. The CNGE2MCPOEM transmits and receives a single channel of Ethernet data. It also supports IEEE 802.3at Class 1 – 4 as power sourcing equipment (PSE) with up to 30 Watts of operating power to the remote powered device. It requires the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. Its electrical interface will Auto-Negotiate to a 10 Mbps, 100 Mbps or 1000 Mbps Ethernet rate without any adjustments. The optical interface operates at 1000 Mbps. The CNGE2MCPOEM is environmentally hardened to operate in extreme temperatures. LED indicators are provided for confirming equipment operating status.
- 10/100/1000 Mbps Ethernet
- 10/100/1000 BASE-T/TX electrical port
- 1000 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10 Mbps, 100 Mbps or 1000 Mbps, full duplex or half duplex data.
- Optical port supports 1000 Mbps full duplex data
- IEEE 802.3at Class 1 – 4 Power over Ethernet (PoE)
- Automatic MDI/MDI-X crossover
- Distances up to 120 km with optional SFPs
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
- Voltage transient protection on all power and signal input/ output lines provides unconditional protection from power surges and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
Downloads
1000Mbps Media Converter, Power Over Ethernet, 48V POE Power Supply Included.
The ComNet CNGE2MCPOEM Ethernet 2 port media converter is designed to transmit and receive 10/100/1000 Mbps data over optical fiber through user selectable SFP options. The CNGE2MCPOEM transmits and receives a single channel of Ethernet data. It also supports IEEE 802.3at Class 1 – 4 as power sourcing equipment (PSE) with up to 30 Watts of operating power to the remote powered device. It requires the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. Its electrical interface will Auto-Negotiate to a 10 Mbps, 100 Mbps or 1000 Mbps Ethernet rate without any adjustments. The optical interface operates at 1000 Mbps. The CNGE2MCPOEM is environmentally hardened to operate in extreme temperatures. LED indicators are provided for confirming equipment operating status.
- 10/100/1000 Mbps Ethernet
- 10/100/1000 BASE-T/TX electrical port
- 1000 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10 Mbps, 100 Mbps or 1000 Mbps, full duplex or half duplex data.
- Optical port supports 1000 Mbps full duplex data
- IEEE 802.3at Class 1 – 4 Power over Ethernet (PoE)
- Automatic MDI/MDI-X crossover
- Distances up to 120 km with optional SFPs
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
- Voltage transient protection on all power and signal input/ output lines provides unconditional protection from power surges and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
Downloads
There are no reviews for this product.
No questions about this product.
