The CNGE3FE7MS3 is a managed ethernet switch which provides robust transmission of seven (7) 10/100BASE-T(X) and three (3) 10/100/1000T(X) or 100/1000FX combo ports, of Gigabit Ethernet data. It is available for use with either conventional CAT-5e copper or optical transmission media. The 7 electrical ports support the 10/100Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation. Three ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP* modules. This network managed layer 2 switches are optically (100/1000BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. The CNGE3FE7MS3 incorporates LED indicators for monitoring the operating status of the managed switch and network. These units are DIN-rail or wall mountable.
- 7 10/100BASE-T(X) Ports 3 Gigabit combo ports
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high line/low line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Operating Temperature: -40? C to +75? C. Functional to +85? C
- Compatible and fully functional when used in a Moxa® Turbo ring topology
- SNMP v1/v2c/v3, RMON & IEEE 802.1Q VLAN for secure network management
- Redundant DC inputs for uninterrupted operation in the event of a loss of power
- HTTPS/SSH protocol for enhanced network security
- DDM (Digital Diagnostic Monitoring) remotely ascertains the status of the operating voltage, current, and operating temperature of the SFP modules
- RMON for traffic monitoring
- Supports LLDP (Link Layer Discovery Protocol)
- Multiple Notifications for warning of unexpected events, including relay fault alarm
- Port lock to prevent access from unauthorized MAC address
- Windows utility, eConsole, supports centralized management and is web-based configurable, or by Telnet and console (CLI) ports
- Rigid aluminum housing design provides for DIN-Rail or wall mounting
Downloads
The CNGE3FE7MS3 is a managed ethernet switch which provides robust transmission of seven (7) 10/100BASE-T(X) and three (3) 10/100/1000T(X) or 100/1000FX combo ports, of Gigabit Ethernet data. It is available for use with either conventional CAT-5e copper or optical transmission media. The 7 electrical ports support the 10/100Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation. Three ports are 10/100/1000 configurable for copper or fiber media for use with multimode or single mode optical fiber, selected by optional SFP* modules. This network managed layer 2 switches are optically (100/1000BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. The CNGE3FE7MS3 incorporates LED indicators for monitoring the operating status of the managed switch and network. These units are DIN-rail or wall mountable.
- 7 10/100BASE-T(X) Ports 3 Gigabit combo ports
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high line/low line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Operating Temperature: -40? C to +75? C. Functional to +85? C
- Compatible and fully functional when used in a Moxa® Turbo ring topology
- SNMP v1/v2c/v3, RMON & IEEE 802.1Q VLAN for secure network management
- Redundant DC inputs for uninterrupted operation in the event of a loss of power
- HTTPS/SSH protocol for enhanced network security
- DDM (Digital Diagnostic Monitoring) remotely ascertains the status of the operating voltage, current, and operating temperature of the SFP modules
- RMON for traffic monitoring
- Supports LLDP (Link Layer Discovery Protocol)
- Multiple Notifications for warning of unexpected events, including relay fault alarm
- Port lock to prevent access from unauthorized MAC address
- Windows utility, eConsole, supports centralized management and is web-based configurable, or by Telnet and console (CLI) ports
- Rigid aluminum housing design provides for DIN-Rail or wall mounting
Downloads
There are no reviews for this product.
No questions about this product.
