RS232/422/485 2&4W Bi-directional Universal Data Transceiver, mm, 1 fiber. The ComNet FDX60M1A data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates a bi-color (Red/Green) indicating LED for monitoring proper system operation. The FDX60 has a built-in fiber link test feature that allows for the testing of the fiber.
- Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments
- NTCIP compatible
- Fiberlink Fiber Link Tester
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- Wide optical dynamic range: optical attenuators are never required
- Indicating LEDs display equipment operating status
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use - ComFit
Downloads
RS232/422/485 2&4W Bi-directional Universal Data Transceiver, mm, 1 fiber. The ComNet FDX60M1A data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates a bi-color (Red/Green) indicating LED for monitoring proper system operation. The FDX60 has a built-in fiber link test feature that allows for the testing of the fiber.
- Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments
- NTCIP compatible
- Fiberlink Fiber Link Tester
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- Wide optical dynamic range: optical attenuators are never required
- Indicating LEDs display equipment operating status
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use - ComFit
Downloads
There are no reviews for this product.
No questions about this product.
