Universal Data Point To Point 'B' End, 1 Fiber, MM
The ComNet FDX70EBM1 data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one multimode optical fiber. The transceivers are transparent to data encoding allowing for broad-range compatibility. Models within this series are available for use with multimode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.
- Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments
- NTCIP compatible
- Remote Fault Indication allows the user to determine when a fiber break or loss of prime operating power has occurred, or a transceiver in the field has failed
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- Wide optical dynamic range: optical attenuators are never required
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use – ComFit
- May be DIN-rail mounted with the ComNet model DINBKT1 or DINBKT4 adaptors (sold separately)
Downloads
Universal Data Point To Point 'B' End, 1 Fiber, MM
The ComNet FDX70EBM1 data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one multimode optical fiber. The transceivers are transparent to data encoding allowing for broad-range compatibility. Models within this series are available for use with multimode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.
- Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments
- NTCIP compatible
- Remote Fault Indication allows the user to determine when a fiber break or loss of prime operating power has occurred, or a transceiver in the field has failed
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- Wide optical dynamic range: optical attenuators are never required
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use – ComFit
- May be DIN-rail mounted with the ComNet model DINBKT1 or DINBKT4 adaptors (sold separately)
Downloads
There are no reviews for this product.
No questions about this product.
