Digitally Encoded Video Receiver/ Data Transceiver, mm, 1 fiber.
The ComNet FVR1031 transmits 10 bit digital video and full duplex data over one Multimode fiber. The video supports NTSC, PAL and SECAM CCTV camera systems. The data supports RS232, RS422 and RS485 (2W & 4W) at data rates up to 115 Kbps (NRZ). The FVT/FVR1031 series also supports "UP-THE-COAX" control signals for Pelco and Panasonic cameras with a maximum distance of 1500 feet (590 meters). The product is "Plug-and-Play" with no electrical or optical adjustments.
- 10-bit digitally encoded video transmission
- Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Supports Pelco and Panasonic "UP-THE-COAX" control signals for a distance up to 1500 feet (590 meters)
- Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events
- Automatic resettable fuses on all power lines
- Hot-Swappable Modules
- Interchangeable between stand-alone or rack mount use – ComFit
- May be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Downloads
Digitally Encoded Video Receiver/ Data Transceiver, mm, 1 fiber.
The ComNet FVR1031 transmits 10 bit digital video and full duplex data over one Multimode fiber. The video supports NTSC, PAL and SECAM CCTV camera systems. The data supports RS232, RS422 and RS485 (2W & 4W) at data rates up to 115 Kbps (NRZ). The FVT/FVR1031 series also supports "UP-THE-COAX" control signals for Pelco and Panasonic cameras with a maximum distance of 1500 feet (590 meters). The product is "Plug-and-Play" with no electrical or optical adjustments.
- 10-bit digitally encoded video transmission
- Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Supports Pelco and Panasonic "UP-THE-COAX" control signals for a distance up to 1500 feet (590 meters)
- Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Voltage transient protection on all power and signal input/ output lines provides protection from power surges and other voltage transient events
- Automatic resettable fuses on all power lines
- Hot-Swappable Modules
- Interchangeable between stand-alone or rack mount use – ComFit
- May be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
Downloads
There are no reviews for this product.
No questions about this product.
