Digitally Encoded Video Receiver + Bi-directional Data, Up-the-Coax + Fast Ethernet, sm, 1 fiber.
The ComNet FVR10D1E series video transmitter/ receiver and data transceiver support the simultaneous transmission of short haul quality 10-bit EIA RS-250C digital video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports 'up-the-coax' data transmission from most major manufacturers. Packaged in the exclusive ComNet ComFit housing, the FVR10D1E standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
- 10-bit digital video transmission
- One bi-directional data channel
- One 10/100 BASE-T/TX fast Ethernet port
- IEEE 802.3 compliant
- Automatic MDI/MDI-X crossover
- Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Certified to the requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
- Automatic resettable fuses on all power lines
- Distances up to 2 miles (3 km)
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- FVR10D1E(M)(S) is a hot-swappable rack module
- FVR10D1E(M)(S) is interchangeable between standalone or rack mount use – ComFit
Downloads
Digitally Encoded Video Receiver + Bi-directional Data, Up-the-Coax + Fast Ethernet, sm, 1 fiber.
The ComNet FVR10D1E series video transmitter/ receiver and data transceiver support the simultaneous transmission of short haul quality 10-bit EIA RS-250C digital video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports 'up-the-coax' data transmission from most major manufacturers. Packaged in the exclusive ComNet ComFit housing, the FVR10D1E standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
- 10-bit digital video transmission
- One bi-directional data channel
- One 10/100 BASE-T/TX fast Ethernet port
- IEEE 802.3 compliant
- Automatic MDI/MDI-X crossover
- Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
- Compatible with all NTSC, PAL, or SECAM CCTV camera systems
- Certified to the requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events
- Automatic resettable fuses on all power lines
- Distances up to 2 miles (3 km)
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- FVR10D1E(M)(S) is a hot-swappable rack module
- FVR10D1E(M)(S) is interchangeable between standalone or rack mount use – ComFit
Downloads
There are no reviews for this product.
No questions about this product.
