Industrial 4 × 1000Base-FX Multimode ST Fiber ports – Module Only. ComNet product series RLXE4GE24MODMS is a substation-rated and industrially-hardened modular-configuration all-gigabit managed layer 2 switch/layer 3 router. The RLXE4GE24MODMS is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, track-side electronic equipment, and other difficult out-of-plant installations. The layer 3 static routing functionality allows for the participation and foundation of a core network infrastructure.
The user-configurable modularity provides a truly future-proof platform that may be upgraded or changed in the field at any time, to support changes in the user’s communications and networking requirements as they arise. Four slots are provided in the chassis for accommodating individual modules featuring different combinations of SFP and electrical 10/100/1000BASE-TX communications ports. The uplink module slot can accept either a 1 gigabit or a 10 gigabit module, with two or four 1 or 10 Gbps SFP+ ports.
- Fully compliant with the requirements of IEC 61850-3 and IEEE 1613 Class 2, for use in electrical utility substations; NEMA TS-1/ TS-2 for Traffic Signal Control Equipment; and EN50155 for railway applications
- Future-proof fully modular configuration supports changes to the users communications and networking requirements, and simplifies network planning and design
- Choice of 100Mb, 1000Mb, or 10Gb port speeds, with either SFPs or fixed ST or SC optics
- Environmentally hardened for deployment in difficult unconditioned out-of-plant installations: Extended ambient operating temperature range of -40°C to +85°C, for use in virtually any environment. Conformal coating is optionally available for humidity with condensation or airborne particulate matter environments.
- Dual-redundant power supplies significantly reduce the possibility of a single-point-of-failure, for the highest system and network reliability. Multiple AC and DC operating voltages with front or rear chassis power connection interfaces available.
- Supports IEEE 1588v2 Precision Timing Protocol, Transparent Clock Synchronization (TC), for protective relaying and control applications
- User-programmable alarm relay for local or remote indication of a fault condition
- Layer 3 static routing, RIP, and VRRP functions
- C-Ring compatible: Network recovery time <30ms, with >250 switches within the ring, for Ethernet redundancy
- Com-Ring open architecture supports other switch manufacturers’ ring technologies, for seamless network integration
- MSTP, with RSTP/STP compatibility
- IEC 62439-2 MRP (Media Redundancy Protocol)
- IPV6 internet protocol (latest version)
- Support for Modbus TCP protocol
- VLAN unaware: Supports priority-tagged frames to be received by specific IEDs (Intelligent Electronic Devices)
- Provides HTTPS/SSH protocol for enhanced network security
- IEEE 802.3AZ Energy Efficient Ethernet-Compliant
- SMTP client, & IP-based bandwidth management
- Application-based QoS management
- Device Binding security function
- DOS/DDOS auto-prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- ACL, TACACS+ and 802.1x User Authentication for network security
- 9.6K Bytes Jumbo Frame
- Web-based, Telnet, Console (CLI), and Windows utility (eConsole) configuration
Downloads
Industrial 4 × 1000Base-FX Multimode ST Fiber ports – Module Only. ComNet product series RLXE4GE24MODMS is a substation-rated and industrially-hardened modular-configuration all-gigabit managed layer 2 switch/layer 3 router. The RLXE4GE24MODMS is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, track-side electronic equipment, and other difficult out-of-plant installations. The layer 3 static routing functionality allows for the participation and foundation of a core network infrastructure.
The user-configurable modularity provides a truly future-proof platform that may be upgraded or changed in the field at any time, to support changes in the user’s communications and networking requirements as they arise. Four slots are provided in the chassis for accommodating individual modules featuring different combinations of SFP and electrical 10/100/1000BASE-TX communications ports. The uplink module slot can accept either a 1 gigabit or a 10 gigabit module, with two or four 1 or 10 Gbps SFP+ ports.
- Fully compliant with the requirements of IEC 61850-3 and IEEE 1613 Class 2, for use in electrical utility substations; NEMA TS-1/ TS-2 for Traffic Signal Control Equipment; and EN50155 for railway applications
- Future-proof fully modular configuration supports changes to the users communications and networking requirements, and simplifies network planning and design
- Choice of 100Mb, 1000Mb, or 10Gb port speeds, with either SFPs or fixed ST or SC optics
- Environmentally hardened for deployment in difficult unconditioned out-of-plant installations: Extended ambient operating temperature range of -40°C to +85°C, for use in virtually any environment. Conformal coating is optionally available for humidity with condensation or airborne particulate matter environments.
- Dual-redundant power supplies significantly reduce the possibility of a single-point-of-failure, for the highest system and network reliability. Multiple AC and DC operating voltages with front or rear chassis power connection interfaces available.
- Supports IEEE 1588v2 Precision Timing Protocol, Transparent Clock Synchronization (TC), for protective relaying and control applications
- User-programmable alarm relay for local or remote indication of a fault condition
- Layer 3 static routing, RIP, and VRRP functions
- C-Ring compatible: Network recovery time <30ms, with >250 switches within the ring, for Ethernet redundancy
- Com-Ring open architecture supports other switch manufacturers’ ring technologies, for seamless network integration
- MSTP, with RSTP/STP compatibility
- IEC 62439-2 MRP (Media Redundancy Protocol)
- IPV6 internet protocol (latest version)
- Support for Modbus TCP protocol
- VLAN unaware: Supports priority-tagged frames to be received by specific IEDs (Intelligent Electronic Devices)
- Provides HTTPS/SSH protocol for enhanced network security
- IEEE 802.3AZ Energy Efficient Ethernet-Compliant
- SMTP client, & IP-based bandwidth management
- Application-based QoS management
- Device Binding security function
- DOS/DDOS auto-prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- ACL, TACACS+ and 802.1x User Authentication for network security
- 9.6K Bytes Jumbo Frame
- Web-based, Telnet, Console (CLI), and Windows utility (eConsole) configuration
Downloads
There are no reviews for this product.
No questions about this product.
