6 AWG XHHW Building Wire

#6 Stranded Copper XHHW-2 Wire

Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 30' maximum 1000'. Please call for longer put ups

Applications:
Type XHHW-2/RW90 building wire is intended general purpose applications utilized conduit, underground or other recognized raceways services, feeders, and branch-circuit wiring as specified National Electrical Code (NEC). Type permitted 600 volt can be used wet dry locations at temperatures not exceed 90ºC. Suitable requiring low-leaking circuits a dielectric constant of 3.5 less.

Features:
Available sizes 14 AWG through 1000 KCMIL. On 250 KCMIL larger, sequential foot markings located every easy measuring. 1 4/0 AWG, master reels only unless otherwise specified. 6 larger rated Sunlight Resistant all colors. 1/0 are cable tray use comply with IEEE 1202/FT4 (70,000 Btu/hr) flame test ICEA T-29-520 (210,000 test.

Standards:
Underwriters Laboratories Standard UL-44
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Standards Association C22.2 No. 38
NEMA WC-70/ICEA S-95-658
NFPA 70: (NEC)
UL 1685-FT4/IEEE 1202 (1/0 larger)
ICEA Test
ARRA 2009; Section 1605 "Buy American" Compliant

Construction:
Conductors:
Stranded, uncoated bare conductors per ASTM-B3, ASTM-B787 ASTM-B8
Insulation:
Cross-linked polyethylene (XLPE) insulation UL-44

6 Specifications*:

Size: AWG
Number Strands: 7
Insulation Thickness XLPE: 1.14 mm / 0.045 inches
Outside Diameter: 6.96 0.274 inches
Weight: 0.107 lbs ft
Allowable Ampacity: 55 Amps 60ºC 65 75ºC 75 90ºC

*Data provided this page subject change based different manufacturers variances.