The D3-TR-POE-W/O revolutionary Dotworkz D3 Tornado Dual Blower Camera Enclosure IP68 with PoE and no Power Injector (D3-TR-POE-WO) outdoor camera housing system is now available with a High-Flow blower option. The Tornado D3 provides needed air flow circulation around the enclosed camera and sensitive hardware, significantly reducing hotspot buildup when temperatures heat up. The Tornado D3 is ideal for milder climates where temperature extremes are rare but thermal protection is required. The Tornado operates at a max of 4 watts. The Tornado D3 delivers 20 CFM (Cubic Feet Per Minute) air movement where it’s needed most to keep cameras and components within their safe operational temperature range. In addition, the polycarbonate thermal plastic compound provides maximum IR reflection. Inside a reflective thermal blanket provides heat and EMI shielding for year-round peak performance. Excessive heat can damage cameras. The ultimate barrier between the camera and outside heat, the Tornado D3 camera enclosure significantly reduces heat-related wear-and-tear. It is also tested to be water, dust and air tight. For more extreme heat, Dotworkz suggests the D3 equipped with the COOLDOME module designed for use where temperatures exceed 105° F (66° C).
Features
- IP and analog camera compatible
- Vari-Fit internal bracket included for perfect fit
- Impact Resistant Polycarbonate Thermal Plastic
- 20 CFM high flow air movement from the Dual Blower
- IP68 rated against dust, water, and salt water air
- IP68 (waterproof) connection ports
- Will not rust or corrode
- On board Component mounting space for: routers, cell networks, hard drives, UPS, WiMAX, mesh hardware, etc
- On board antenna mounting tab
- Heavy-duty lower lens
- Now with PoE
- No Power Injector
The D3-TR-POE-W/O revolutionary Dotworkz D3 Tornado Dual Blower Camera Enclosure IP68 with PoE and no Power Injector (D3-TR-POE-WO) outdoor camera housing system is now available with a High-Flow blower option. The Tornado D3 provides needed air flow circulation around the enclosed camera and sensitive hardware, significantly reducing hotspot buildup when temperatures heat up. The Tornado D3 is ideal for milder climates where temperature extremes are rare but thermal protection is required. The Tornado operates at a max of 4 watts. The Tornado D3 delivers 20 CFM (Cubic Feet Per Minute) air movement where it’s needed most to keep cameras and components within their safe operational temperature range. In addition, the polycarbonate thermal plastic compound provides maximum IR reflection. Inside a reflective thermal blanket provides heat and EMI shielding for year-round peak performance. Excessive heat can damage cameras. The ultimate barrier between the camera and outside heat, the Tornado D3 camera enclosure significantly reduces heat-related wear-and-tear. It is also tested to be water, dust and air tight. For more extreme heat, Dotworkz suggests the D3 equipped with the COOLDOME module designed for use where temperatures exceed 105° F (66° C).
Features
- IP and analog camera compatible
- Vari-Fit internal bracket included for perfect fit
- Impact Resistant Polycarbonate Thermal Plastic
- 20 CFM high flow air movement from the Dual Blower
- IP68 rated against dust, water, and salt water air
- IP68 (waterproof) connection ports
- Will not rust or corrode
- On board Component mounting space for: routers, cell networks, hard drives, UPS, WiMAX, mesh hardware, etc
- On board antenna mounting tab
- Heavy-duty lower lens
- Now with PoE
- No Power Injector
There are no reviews for this product.
No questions about this product.
