Elk ELK-319WA Water Sensor, 319.5 MHz

The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on wall or other flat vertical surface, and remote probe placed in location where leakage most probable.

Moisture forming bridge between two metallic contacts all needed for unit to signal an alarm condition. output will remain state until moisture broken. As sensitive is, it not due high humidity condensation. ideal use homes, offices, computer rooms, warehouses, etc.

Compatible with E27 Engine, M1 Controls, systems support 319.5 MHz devices.

• Water detection when liquid makes contact probe
• Contacts above floor level prevent false condensation detection
• Checks constantly, requires positive checks valid alarm
• Battery checked every hour
• Batteries (2) CR2032
• Tamper Switch: Located inside transmitter
• RF frequency: MHz
• Compatibility: ELK Receivers/Panels & panels operate 319.5MHz Freq.
• Battery type: CR2032 3VDC lithium coin-cell
• Code Outputs: Tamper, Tamper Restore, Alarm, Low Battery
• Operating Temp Range: 32° 122°F (-40° 60° C)
• Dimensions Transmitter: 2.71” H x .95” W .56” D, Probe: .7” 1.77” L .38” D
• Cable Length 72”

Note: self- contained warning device. proper operation, must be used conjunction compatible learn-mode control panel. This Elk’s 319MHz well many Frequency adhere ITI/Interlogix protocol.