La traducción está en preparación. Algunos textos aún se muestran en inglés.
Modelo:
ST-MA2
SKU:
ST-MA2
Disponibilidad:
En stock
$136.33
Precio estimado. El precio final y la disponibilidad están sujetos a confirmación. Póngase en contacto con nuestro equipo de ventas para obtener un presupuesto actual.
  0 reviews

The RDL ST-MA2 Mono Audio Amplifier with Muting is a 2W, 8-Ohm single-speaker amplifier designed for conferencing monitor amplification.

The RDL ST-MA2 Mono Audio Amplifier with Muting is a 2W, 8-Ohm single-speaker amplifier designed for conferencing monitor amplification. This device features an input impedance of 20 kOhms, balanced or unbalanced bridging, and an input level of -10 dBV minimum for 2 W RMS output. The output impedance is 8 Ohms, capable of driving 4 Ohm loads. It provides 1.75 W RMS continuous power with a maximum of 2 W RMS. The amplifier has a THD & Noise of less than 0.5%, a bandwidth of 45 Hz to 14 kHz, and a common mode rejection ratio greater than 60 dB (50 Hz to 120 Hz).

Residual noise is below -80 dB (below 2 W RMS), with a switching time under 50 µs. Mute attenuation exceeds 90 dB at 1 kHz, 85 dB between 300 Hz and 3 kHz, and 75 dB from 20 Hz to 20 kHz. Attenuation is selectable at 3 dB or 6 dB, with each setting individually adjustable via two independent inputs. The ambient operating environment ranges from 32 to 104°F / 0 to 40°C.

  • Input Impedance: 20 kOhms Balanced or Unbalanced Bridging
  • Input Level: -10 dBV Minimum for 2 W RMS Output
  • Output Impedance: 8 Ohms (Will Drive 4 Ohms Loads)
  • Output Power: 1.75 W RMS Continuous 2 W RMS Max.
  • THD & Noise:

Especificaciones

Ambient Operating Environment
32 a 104°F / 0 a40°C
Ancho de banda
45 Hz to 14 kHz
Dimensiones de la caja (LxWxH)
4 x 2 x 1.9"
Dimensiones
No especificado por el fabricante
Impedimiento de la entrada
20 kOhms Balanced or Unbalanced Bridging
Impedición de los productos
8 Ohms (Will Drive 4 Ohms Loads)
Potencia de salida
1.75 W RMS Continuous 2 W RMS Max.
Peso del envase
0.185 lb
Requisitos de potencia
Ground-Referenced 24 VDC @ 200 mA for Rated Output (220 mA @ 2 W RMS)
Tiempo de conmutación
& Ruido del THD
Peso
No especificado por el fabricante
Atenciones
Selectable: 3 dB or 6 dB, Each Setting Individually Selectable Using Two Independent Inputs (Connect to Ground to Activate, 0.3 mA)
Rechazo de modo común Ratio
> 60 dB (50 Hz to 120 Hz)
Nivel de entrada
10 dBV Minimum for 2 W RMS Output
Ruido residual
Atenuación silenciosa
> 90 dB (1 kHz) > 85 dB (300 Hz to 3 kHz) > 75 dB (20 Hz to 20 kHz)
Reseñas: 0

Este producto no tiene opiniones.

Preguntas: 0

No hay preguntas sobre este producto.

Productos similares