The GRI 2120 Ribbed Switch, designed to complete a multi-task role, is a unique combination of special features and materials. The unusual ribbed outside diameter permits a secure mountain over a wide range of drilled hole sizes. The installer does not have to glue this recessed switch into a slightly oversized hole, as the flexible ribs conform as it is pressed into the wood. Self adjusting to fit the larger hole, the 2120 also centers itself to the coverage of the mis-drilled hole.
Picked especially for the 2120 Ribbed Switches, a new material with enhanced memory properties allow the ribbed “O rings” to flex enough to fit an undersized hole but sill maintain a firm holding force in an oversized hole. This mix of features yields an additional bonus in that it proves a high degree of protection from crushing, such as that encountered when wood swells or headers shift.
Finally, for installations utilizing and angled wire path away from the hole drilled for the switch barrel, the 2120 merely need to be aligned with one flat side along the path drilled for the lead wire and press fit. The ribbed rings, not being continuous, simply adjust to the wire and allow for an easy and quick install.
Features
- Recessed magnetic contact
- Ribbed design allows secure fit
- Protects reed from swelling wood and header shift
- Cover over-drilled holes
- Self-centering
- Solves angled wire path problems
- Press to fit
- 12" #22AWG Leads
- Longer leads, zip cord or jacketed cable upon request
- Hermetically sealed
- Plated contacts resist sticking or freezing
- Built-in E.O.L. Resistors and Diodes upon request
- Supervisory Loops available upon request
- Switches and Magnets available separately
- Colors: white and brown
Downloads
3-8-Ribbed-Recessed-Switch-Set-Specsheet
The GRI 2120 Ribbed Switch, designed to complete a multi-task role, is a unique combination of special features and materials. The unusual ribbed outside diameter permits a secure mountain over a wide range of drilled hole sizes. The installer does not have to glue this recessed switch into a slightly oversized hole, as the flexible ribs conform as it is pressed into the wood. Self adjusting to fit the larger hole, the 2120 also centers itself to the coverage of the mis-drilled hole.
Picked especially for the 2120 Ribbed Switches, a new material with enhanced memory properties allow the ribbed “O rings” to flex enough to fit an undersized hole but sill maintain a firm holding force in an oversized hole. This mix of features yields an additional bonus in that it proves a high degree of protection from crushing, such as that encountered when wood swells or headers shift.
Finally, for installations utilizing and angled wire path away from the hole drilled for the switch barrel, the 2120 merely need to be aligned with one flat side along the path drilled for the lead wire and press fit. The ribbed rings, not being continuous, simply adjust to the wire and allow for an easy and quick install.
Features
- Recessed magnetic contact
- Ribbed design allows secure fit
- Protects reed from swelling wood and header shift
- Cover over-drilled holes
- Self-centering
- Solves angled wire path problems
- Press to fit
- 12" #22AWG Leads
- Longer leads, zip cord or jacketed cable upon request
- Hermetically sealed
- Plated contacts resist sticking or freezing
- Built-in E.O.L. Resistors and Diodes upon request
- Supervisory Loops available upon request
- Switches and Magnets available separately
- Colors: white and brown
Downloads
3-8-Ribbed-Recessed-Switch-Set-Specsheet
There are no reviews for this product.
No questions about this product.
