Plastic wall-mounted Maestro motion sensor switch with passive infrared sensing, supporting 6 Amp lighting and 3 Amp fan loads at 120-277V. Features adjustable timeout and sensitivity.
Plastic wall-mounted occupancy sensor switch with passive infrared detection using Lutron XCT technology. Covers up to 900 ft2 major motion and 400 ft2 minor motion areas with a 180 degree field of view. Supports 6 Amp lighting and 3 Amp fan loads including incandescent, halogen, ELV, MLV, CFL, LED, magnetic and electronic fluorescent. Operates at 120 to 277 volts with adjustable timeout settings of 1, 5, 15, or 30 minutes and high/low sensitivity options. Requires ground or neutral wiring and is suitable for indoor use within 0 to 90 percent humidity and 32 to 104 Fahrenheit operating temperature.
Combines a Maestro switch with a passive infrared occupancy sensor. Detects the heat from occupants moving within an area to determine whether the space is occupied. Based on the feedback from the sensor, the occupancy sensing switch will adjust the load accordingly. Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection. 180 degree sensor field-of-view. Up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage. Can be set to auto-on/auto-off or manual-on/auto-off. Adjustable timeout (1, 5, 15, or 30 minutes) and high/low sensitivity adjustment. Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan. Ground wire required.
Environmental Conditions
0 to 90% humidity, non-condensing. Indoor use only.
Enclosure
Plastic
Operating Temperature
32 to 104 F
Supply Voltage
120 to 277
Sensing Range
900 ft2 (82 m2) major motion coverage/400 ft2 (36 m2) minor motion coverage
Sensor
Passive infrared motion detection with dependable Lutron XCT technology
Spec Sheet
