Ashly NX3.02 Programmable Output Power Amplifier

The Ashly NX3.02 Programmable Output Power Amplifier is designed for professional audio applications. It offers per channel output power of 3,000 W at 2 Ω, 2,000 W at 4 Ω, and 1,250 W at 8 Ω. The amplifier also supports bridge mode with 6,000 W at 4 Ω. It includes 70 V and 100 V output options. Power draw specifications include sleep mode under 1 W, standby mode 40 W, and idle mode 55 W. Current draw is 120 VAC (divided by 2 for 240 V), with sleep mode 0.1 A, standby mode 0.70 A, and idle mode 1.00 A. Thermal dissipation ranges from 3.4 BTU/hr in sleep mode to 187 BTU/hr in idle mode. Voltage gain is selectable at 26 dB, 32 dB, 38 dB, or 1.4 V. Damping factor exceeds 250 for an 8 Ω load below 1 kHz. The unit features a high-pass filter input of 80 Hz with second order response. Distortion is under 0.5% THD-N and 0.5% at 8 Ω, 10 dB below rated power. Channel separation is -75 dB at 1 kHz. Signal to noise ratio exceeds 114 dB from 20 Hz to 20 kHz. Frequency response is +/-0.05 dB across 20 Hz to 20 kHz. Input connectors include balanced Euroblock 3.5 mm, 1/4" TRS, and XLR combo jack.

• Output Power: Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1%THD, Low Z Output, All Channels Driven 2 Ω: 3,000 W 4 Ω: 2,000 W 8 Ω: 1,250 W Low Z output, Bridge Mode, 20 Hz to 20 kHz, 1%THD, All Channels Driven 4 Ω: 6,000 W 70 V, 100 V Output, All Channels Driven 70 V (per channel): 2,450 W 100 V (per channel): 1,250 W
• Power Draw: Sleep Mode:
• Current Draw: 120 VAC Mains (Divide by 2 for 240 V) Sleep Mode: 0.1 A Standby Mode: 0.70 A Idle (no signal): 1.00 A All Channels Driven (Divide by 2 for 240 VAC) Typical: 14.7 A
• Dissipation: Thermal (All Channels Driven) Sleep Mode: 3.4 BTU/hr Standby Mode: 136 BTU/hr Idle (no signal): 187 BTU/hr Typical (1/8 maximum power): 1360 BTU/hr
• Voltage Gain: Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V